X8 frito...

[Jamfri]

Buenas, creo que he dejado frito mi X8..

Bootloader ok..ya sabéis, r en minúscula...

He instalado la BASEBAND
He instalado nAa 2.6.29.6-naA-ics...
Wipes, factorys, etc...
instalada MiniCM9-3.0.5
instaladas gapps
y despues del reinicio, entra en loop con el arranque otra vez de nAa...

Se os ocurre alguna posibilidad?

Alguna cosa me habré saltado, pero hace un par de horas que estoy 'enrocado' en lo mismo y he preferido pedir ayuda :)

Gracias!!

[Jamfri]

Bueno, de momento me he bajado la rom original....y parece que arranca.
El tuto que he usado es el de XA....

Requirements:

Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: M76XX-TSNCJOLYM-53404015
Unlocked bootloader (http://forum.xda-developers.com/showthread.php?t=1254225)
Latest version of the ICS nAa kernel (http://forum.xda-developers.com/showthread.php?p=24304432)



Instructions: (http://code.google.com/p/minicm/wiki/Installation_guide)

Download the MiniCM9-xxx.zip from the release link that follows
Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
Move the MiniCM9-xxx.zip to the root folder of your sdcard. Download the suggested Google Apps for CM9 from here (http://goo.im/gapps/gapps-ics-20120429-signed.zip) (check http://goo-inside.me/gapps/ if you want to experiment with other gapps versions)
Make sure you are using the nAa-ics kernel
Enter CWM and:
- Select 'backup and restore -> Backup'
- Select 'wipe data/factory reset' (MUST DO)
- Flash the MiniCM9-xxx.zip. To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the MiniCM9-xxx.zip
- Flash gapps in the same way
Reboot (first boot will take ~2 mins)
Once your device has booted, you can use the nAa notification to register for upcoming updates. This way you can get update notifications on new versions of MiniCM9 and the nAa-ics kernel!



Es posible que sea por los requisitos?
Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: M76XX-TSNCJOLYM-53404015