P_P
20/07/13, 13:36:30
[ROM] PHOENIX Firmware v5 [4.2.1]
De Tamal Ghosh (https://www.facebook.com/loy.ron) en Kata i1/iBall Andi 4.5h/OneScribe ZA985/Malata i8/bq Aquaris User's Group (https://www.facebook.com/groups/357361847702937/)
This is 4.2.1 JellyBean based on 3.4.0 Kernel (sdk version = 16).... Stock Firmware of Ucall Phoenix...
It is not flashable through TWRP/CWM.... You have to use SP Flash Tool to flash this....
Download Link::
http://v2.adf.ly/SLn3S
parche para usuarios acuaris , enlace :
https://cloudpt.pt/link/6c14db73-1a14-4558-940a-137dca453c9f/Phoenix%204.2%20Aquaris%20Patch.zip (http://www.facebook.com/l.php?u=https%3A%2F%2Fcloudpt.pt%2Flink%2F6c14db73-1a14-4558-940a-137dca453c9f%2FPhoenix%25204.2%2520Aquaris%2520Pat ch.zip&h=2AQHVjJ1k)
Instructions to Flash::
Download the PHOENIX_Firmware_Update_v5.7z to PC.
Extract it using 7zip file browser tool.
First install USB Adb drivers and Preloader VCOM drivers to PC.
Check in Device Manager if Android device is properly insatalled..
Nowswitch off ur device..
Remove ur battery for 5 seconds and insert it again.
Insert microUSB cable and listen to the sound of attaching USB device to PC.
Just for 1/2 seconds the COM port will be seen in device manager of PC if u have installed all drivers corrctly.
Now go to SP Flash Tool v3.1224.0.sn85 folder and open flashtool.exe with admin privilage.
Load scatter file from scatter-loading option and select it from PHOENIX Rom folder (MT6577_Android_scatter_emmc.txt)
All options should be checked except cache and Userdata.
Now switch off your phone.
Remove Battery and connect microUSB cable.
wait for 5 seconds and click download button on SP Flash tool.
If u see searching below the SP Flash tool instert Battery.
You will see preloader VCOM driver detected bottom right side of Flash Tool.
If there is no error, you will see Blue, then Violet, then Yellow progress bar to reach 100% one by one.
At the end a green circle of Success.
All is done.
Enjoy your 4.2.1 Rom.....:)
http://www.ucall.fr/sites/www.ucall.fr/files/phoenix_blanc_0.jpg
según comenta tamal es una rom 4.1. jelly bean en realidad basada en la stock del modelo de arriba , para usarla en acuaris se necesita un parche .
falla el sensor de proximidad , App de bloqueo por cara ( face-lock ) y scenes .
Proximity Sensor does not work on calls.
Face lock does not work.
Scenes does not work.
por lo demás parece que funciona correctamente .
!! USADLA BAJO VUESTRA RESPONSABILIDAD !!
esto va dedicado para aquellos que DUDAN de que exista una JB para nuestro acuaris y que MENOSPRECIAN la "supuesta " escene de nuestro móvil .
menos hablar ,manipular y mas aportar .
para mas info : apuntaros al grupo de Facebook del comienzo del post .
De Tamal Ghosh (https://www.facebook.com/loy.ron) en Kata i1/iBall Andi 4.5h/OneScribe ZA985/Malata i8/bq Aquaris User's Group (https://www.facebook.com/groups/357361847702937/)
This is 4.2.1 JellyBean based on 3.4.0 Kernel (sdk version = 16).... Stock Firmware of Ucall Phoenix...
It is not flashable through TWRP/CWM.... You have to use SP Flash Tool to flash this....
Download Link::
http://v2.adf.ly/SLn3S
parche para usuarios acuaris , enlace :
https://cloudpt.pt/link/6c14db73-1a14-4558-940a-137dca453c9f/Phoenix%204.2%20Aquaris%20Patch.zip (http://www.facebook.com/l.php?u=https%3A%2F%2Fcloudpt.pt%2Flink%2F6c14db73-1a14-4558-940a-137dca453c9f%2FPhoenix%25204.2%2520Aquaris%2520Pat ch.zip&h=2AQHVjJ1k)
Instructions to Flash::
Download the PHOENIX_Firmware_Update_v5.7z to PC.
Extract it using 7zip file browser tool.
First install USB Adb drivers and Preloader VCOM drivers to PC.
Check in Device Manager if Android device is properly insatalled..
Nowswitch off ur device..
Remove ur battery for 5 seconds and insert it again.
Insert microUSB cable and listen to the sound of attaching USB device to PC.
Just for 1/2 seconds the COM port will be seen in device manager of PC if u have installed all drivers corrctly.
Now go to SP Flash Tool v3.1224.0.sn85 folder and open flashtool.exe with admin privilage.
Load scatter file from scatter-loading option and select it from PHOENIX Rom folder (MT6577_Android_scatter_emmc.txt)
All options should be checked except cache and Userdata.
Now switch off your phone.
Remove Battery and connect microUSB cable.
wait for 5 seconds and click download button on SP Flash tool.
If u see searching below the SP Flash tool instert Battery.
You will see preloader VCOM driver detected bottom right side of Flash Tool.
If there is no error, you will see Blue, then Violet, then Yellow progress bar to reach 100% one by one.
At the end a green circle of Success.
All is done.
Enjoy your 4.2.1 Rom.....:)
http://www.ucall.fr/sites/www.ucall.fr/files/phoenix_blanc_0.jpg
según comenta tamal es una rom 4.1. jelly bean en realidad basada en la stock del modelo de arriba , para usarla en acuaris se necesita un parche .
falla el sensor de proximidad , App de bloqueo por cara ( face-lock ) y scenes .
Proximity Sensor does not work on calls.
Face lock does not work.
Scenes does not work.
por lo demás parece que funciona correctamente .
!! USADLA BAJO VUESTRA RESPONSABILIDAD !!
esto va dedicado para aquellos que DUDAN de que exista una JB para nuestro acuaris y que MENOSPRECIAN la "supuesta " escene de nuestro móvil .
menos hablar ,manipular y mas aportar .
para mas info : apuntaros al grupo de Facebook del comienzo del post .