cbd
08/12/12, 17:12:16
el mod numero 1 en mejora del sonido, la verdad que merece la pena!!
descarga e infromacion:
●►ACID Audio Engine™◄● |v5.0| Xperia 2011 Optimised | ☆☆☆TEAM AC!D☆☆☆ (http://forum.xda-developers.com/showthread.php?t=2006276)
instalacion:
READ CAREFULLY FOLLOWING INSTRUCTIONS AND ALL WILL BE FINE!
§1 Remove ALL Third app equaliser (DSP Manager, Market EQ app,...)
§2 Be sure your ROM don't have any other Sound MOD preinstalled
§3 Download AC!D Audio Engine
(You can choose between AROMA and the standard flashable zip, read careffuly the difference between AROMA and SIMPLE)
§4 ONLY if you downloaded SIMPLE ZIP, download walkman player and (if you want) the addon of your choice (Noozxoide for example)
§5 Put downloaded files in a special folder on your SDCARD (or internal storage), you can create an AC!D Audio folder (will be usefull in the future)
§6 Once you have all needed files on your phone reboot in recovery (CWM)
§7 FIRST WIPE CACHE PARTITION AND DALVIK CACHE!!!
§8 SIMPLE UPDATE ZIP: (Walkman is not compatible with any other addon, so you have to choose between Walkman or one of 4 availble Addon)
- AC!D Audio Only (just flash AC!D Engine then reboot)
or
- AC!D + Walkman: First flash AC!D Audio Engine, Then if you want Walkman (with clearbass, xloud etc) Flash Walkman Addon and reboot
or
- AC!D + ADDON: First flash AC!D Audio Engine, (DO NOT FLASH WALKMAN!!!), and then flash the Addon of your choice (Noozxoide for example) and reboot
§9 open an explorer (I recommand Root Explorer) and verify if build.prop lines where added (Go to /system/ and open build.prop file look at the end of this file)
§10 if lines where added correctly just reboot if not add them manually
PHP Code:
###AC!D Sound Tweaks by R-ikfoot###
#Sony Xloud & Clearbass +
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
ro.semc.enhance.supported=true
persist.service.enhance.enable=1
ro.semc.clearaudio.supported=true
persist.service.clearaudio.enable=1
ro.somc.dmnorm.supported=true
persist.service.dmnorm.enable=1
ro.sony.walkman.logger=1
ro.somc.clearphase.supported=true
ro.semc.clearphase.supported=true
persist.service.clearphase.enable=1
#Resampling
af.resampler.quality=255
persist.af.resampler.quality=255
#Beats Engine
persist.audio.SupportHTCHWAEC=1
htc.audio.swalt.enable=1
htc.audio.swalt.mingain=14512
htc.audio.global.state=0
htc.audio.global.profile=0
persist.htc.audio.pcm.samplerate=48000
persist.htc.audio.pcm.channels=2
save build.prop changes and reboot
§13 go to setting sound audioeffect and choose the Equaliser you want (it will keep the one you choosed in memory)
§12 Enjoy a brand new Audio Quality
con traductor:
LEA LAS INSTRUCCIONES CUIDADOSAMENTE LAS SIGUIENTES Y todo estará bien!
§ 1 Retire todo el Tercer ecualizador app (DSP Manager, Market EQ app, ...)
§ 2 Asegúrese de que el ROM no tienen ningún otro MOD sonido preinstalado
§ 3 Descargar AC! D Audio Engine
(Usted puede elegir entre aroma y la cremallera flashable estándar, leer careffuly la diferencia entre aroma y SIMPLE)
§ 4 sólo si ha descargado ZIP SIMPLE, descargar walkman reproductor y (si quieres) el complemento de su elección (Noozxoide por ejemplo)
§ 5 Coloque los archivos descargados en una carpeta especial en su SDCARD (o memoria interna), puede crear un aire acondicionado! Carpeta D Audio (será útil en el futuro)
§ 6 Una vez que haya todos los ficheros necesarios en el reinicio del teléfono en la recuperación (CWM)
§ 7 PRIMERA WIPE partición de memoria caché y caché de DALVIK!
§ 8 Código postal simple actualización: (Walkman no es compatible con cualquier otro addon, así que tienes que elegir entre el Walkman o uno de 4 Addon availble)
- AC Audio D Sólo (¡sólo destello AC Motor D vuelva a arrancar)
o
- AC D + Walkman: Primero destello AC Audio Engine D, entonces si quieres Walkman (con clearbass, xLOUD etc) Flash Addon Walkman y reiniciar el sistema!
o
- AC D + Addon: D En primer destello AC Audio Engine, (NO FLASH WALKMAN!), A continuación, parpadeará el Addon de su elección (Noozxoide por ejemplo) y reiniciar el sistema!
§ 9 abra un explorador (I recommand Root Explorer) y verificar si las líneas se agregaron build.prop (Vaya a / system / y mirada abierta build.prop archivo al final de este archivo)
§ 10 no si las líneas se agregaron correctamente es necesario que reinicies si añadirlos manualmente
Código PHP:
# # # AC! Ajustes de sonido D por R-ikfoot # # #
# Sony xLOUD y Clearbass +
ro.semc.sound_effects_enabled = true
ro.semc.xloud.supported = true
persist.service.xloud.enable = 1
ro.semc.enhance.supported = true
persist.service.enhance.enable = 1
ro.semc.clearaudio.supported = true
persist.service.clearaudio.enable = 1
ro.somc.dmnorm.supported = true
persist.service.dmnorm.enable = 1
ro.sony.walkman.logger = 1
ro.somc.clearphase.supported = true
ro.semc.clearphase.supported = true
persist.service.clearphase.enable = 1
# Remuestreo
af.resampler.quality = 255
persist.af.resampler.quality = 255
# Beats Engine
persist.audio.SupportHTCHWAEC = 1
htc.audio.swalt.enable = 1
htc.audio.swalt.mingain = 14512
htc.audio.global.state = 0
htc.audio.global.profile = 0
persist.htc.audio.pcm.samplerate = 48000
persist.htc.audio.pcm.channels = 2
guardar los cambios y reiniciar build.prop
§ 13 ir a la configuración audioeffect sonido y seleccionar el ecualizador que desea (que se mantendrá el que elegí en la memoria)
§ 12 Disfrute de una marca de calidad de audio nuevo
descarga e infromacion:
●►ACID Audio Engine™◄● |v5.0| Xperia 2011 Optimised | ☆☆☆TEAM AC!D☆☆☆ (http://forum.xda-developers.com/showthread.php?t=2006276)
instalacion:
READ CAREFULLY FOLLOWING INSTRUCTIONS AND ALL WILL BE FINE!
§1 Remove ALL Third app equaliser (DSP Manager, Market EQ app,...)
§2 Be sure your ROM don't have any other Sound MOD preinstalled
§3 Download AC!D Audio Engine
(You can choose between AROMA and the standard flashable zip, read careffuly the difference between AROMA and SIMPLE)
§4 ONLY if you downloaded SIMPLE ZIP, download walkman player and (if you want) the addon of your choice (Noozxoide for example)
§5 Put downloaded files in a special folder on your SDCARD (or internal storage), you can create an AC!D Audio folder (will be usefull in the future)
§6 Once you have all needed files on your phone reboot in recovery (CWM)
§7 FIRST WIPE CACHE PARTITION AND DALVIK CACHE!!!
§8 SIMPLE UPDATE ZIP: (Walkman is not compatible with any other addon, so you have to choose between Walkman or one of 4 availble Addon)
- AC!D Audio Only (just flash AC!D Engine then reboot)
or
- AC!D + Walkman: First flash AC!D Audio Engine, Then if you want Walkman (with clearbass, xloud etc) Flash Walkman Addon and reboot
or
- AC!D + ADDON: First flash AC!D Audio Engine, (DO NOT FLASH WALKMAN!!!), and then flash the Addon of your choice (Noozxoide for example) and reboot
§9 open an explorer (I recommand Root Explorer) and verify if build.prop lines where added (Go to /system/ and open build.prop file look at the end of this file)
§10 if lines where added correctly just reboot if not add them manually
PHP Code:
###AC!D Sound Tweaks by R-ikfoot###
#Sony Xloud & Clearbass +
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
ro.semc.enhance.supported=true
persist.service.enhance.enable=1
ro.semc.clearaudio.supported=true
persist.service.clearaudio.enable=1
ro.somc.dmnorm.supported=true
persist.service.dmnorm.enable=1
ro.sony.walkman.logger=1
ro.somc.clearphase.supported=true
ro.semc.clearphase.supported=true
persist.service.clearphase.enable=1
#Resampling
af.resampler.quality=255
persist.af.resampler.quality=255
#Beats Engine
persist.audio.SupportHTCHWAEC=1
htc.audio.swalt.enable=1
htc.audio.swalt.mingain=14512
htc.audio.global.state=0
htc.audio.global.profile=0
persist.htc.audio.pcm.samplerate=48000
persist.htc.audio.pcm.channels=2
save build.prop changes and reboot
§13 go to setting sound audioeffect and choose the Equaliser you want (it will keep the one you choosed in memory)
§12 Enjoy a brand new Audio Quality
con traductor:
LEA LAS INSTRUCCIONES CUIDADOSAMENTE LAS SIGUIENTES Y todo estará bien!
§ 1 Retire todo el Tercer ecualizador app (DSP Manager, Market EQ app, ...)
§ 2 Asegúrese de que el ROM no tienen ningún otro MOD sonido preinstalado
§ 3 Descargar AC! D Audio Engine
(Usted puede elegir entre aroma y la cremallera flashable estándar, leer careffuly la diferencia entre aroma y SIMPLE)
§ 4 sólo si ha descargado ZIP SIMPLE, descargar walkman reproductor y (si quieres) el complemento de su elección (Noozxoide por ejemplo)
§ 5 Coloque los archivos descargados en una carpeta especial en su SDCARD (o memoria interna), puede crear un aire acondicionado! Carpeta D Audio (será útil en el futuro)
§ 6 Una vez que haya todos los ficheros necesarios en el reinicio del teléfono en la recuperación (CWM)
§ 7 PRIMERA WIPE partición de memoria caché y caché de DALVIK!
§ 8 Código postal simple actualización: (Walkman no es compatible con cualquier otro addon, así que tienes que elegir entre el Walkman o uno de 4 Addon availble)
- AC Audio D Sólo (¡sólo destello AC Motor D vuelva a arrancar)
o
- AC D + Walkman: Primero destello AC Audio Engine D, entonces si quieres Walkman (con clearbass, xLOUD etc) Flash Addon Walkman y reiniciar el sistema!
o
- AC D + Addon: D En primer destello AC Audio Engine, (NO FLASH WALKMAN!), A continuación, parpadeará el Addon de su elección (Noozxoide por ejemplo) y reiniciar el sistema!
§ 9 abra un explorador (I recommand Root Explorer) y verificar si las líneas se agregaron build.prop (Vaya a / system / y mirada abierta build.prop archivo al final de este archivo)
§ 10 no si las líneas se agregaron correctamente es necesario que reinicies si añadirlos manualmente
Código PHP:
# # # AC! Ajustes de sonido D por R-ikfoot # # #
# Sony xLOUD y Clearbass +
ro.semc.sound_effects_enabled = true
ro.semc.xloud.supported = true
persist.service.xloud.enable = 1
ro.semc.enhance.supported = true
persist.service.enhance.enable = 1
ro.semc.clearaudio.supported = true
persist.service.clearaudio.enable = 1
ro.somc.dmnorm.supported = true
persist.service.dmnorm.enable = 1
ro.sony.walkman.logger = 1
ro.somc.clearphase.supported = true
ro.semc.clearphase.supported = true
persist.service.clearphase.enable = 1
# Remuestreo
af.resampler.quality = 255
persist.af.resampler.quality = 255
# Beats Engine
persist.audio.SupportHTCHWAEC = 1
htc.audio.swalt.enable = 1
htc.audio.swalt.mingain = 14512
htc.audio.global.state = 0
htc.audio.global.profile = 0
persist.htc.audio.pcm.samplerate = 48000
persist.htc.audio.pcm.channels = 2
guardar los cambios y reiniciar build.prop
§ 13 ir a la configuración audioeffect sonido y seleccionar el ecualizador que desea (que se mantendrá el que elegí en la memoria)
§ 12 Disfrute de una marca de calidad de audio nuevo