Kernel 3.0.8 ICS código fuente

[KaterM]

HUAWEI Ascend G300 Open Source(U8815,IcecreamSandwich,kernel-3.0.8)
2012-10-18|103.30MB

http://www.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDY4NzQ=

Description
this kernel file is just for ROM developers and do not used to upgrade your moblie phone as the firmware,which may make your phone totally dead.
Product:U8815 （ICS)/U8818 (ICS)/U8666E/U8666N

el aviso en "chinglish" dice algo por el estilo de que se publica solo para desarolladores de ROMs y no debemos ponerlo como firmware porque podemos "matar completamente" al terminal.

[KaterM]

en MoDaCo ha salido el nuevo kernel del miembro "PaulMilbank" que se puede flashear encima de cualquier ROM basada en Huawei stock ICS (p.e. B926 hasta B944, Infusion etc.)
NO sirve para CM9 o CM10 !!!
[Kernel] 308 Kernel for official ICS roms, #19 update 11/11/12 (http://www.modaco.com/topic/358992-kernel-308-kernel-for-official-ics-roms-19-update-111112/)
Está incluido en la B944 Stock + ROM de "Cyda"en la versión actual.

"What is it?
This is a kernel I have been working on for fun when I have time. It uses some commits from Daz and his ICS/JB kernel, Quite a few commits from Code Aurora Forum and a bit from Omegamoon and Geno. I have Also recycled some code from my previous 308 kernel for the Huawei X5/u8800.
I used the 3.08 kernel source from Huawei as a base and pulled the boot.img and config from my stock b936 vodafone NZ rom."
...
Thanks to:
Dazzozo and Fagulhas
Omegamoon
Geno
Code Aurora Forum
Cyda for Init.d support

Fork Me:
All my source is updated on GIT and I try to credit everything I do where needed.
https://github.com/PaulMilbank/g300_kernel
You can build this by using this guide:
http://forum.xda-developers.com/showthread.php?t=1577876
I use ubuntu 12.04 LTS and build off the g300_defconfig.

impresionante trabajo :ok:

[Ashran]

en MoDaCo ha salido el nuevo kernel del miembro "PaulMilbank" que se puede flashear encima de cualquier ROM basada en Huawei stock ICS (p.e. B926 hasta B944, Infusion etc.)
NO sirve para CM9 o CM10 !!!
[Kernel] 308 Kernel for official ICS roms, #19 update 11/11/12 (http://www.modaco.com/topic/358992-kernel-308-kernel-for-official-ics-roms-19-update-111112/)
Está incluido en la B944 Stock + ROM de "Cyda"en la versión actual.

"What is it?
This is a kernel I have been working on for fun when I have time. It uses some commits from Daz and his ICS/JB kernel, Quite a few commits from Code Aurora Forum and a bit from Omegamoon and Geno. I have Also recycled some code from my previous 308 kernel for the Huawei X5/u8800.
I used the 3.08 kernel source from Huawei as a base and pulled the boot.img and config from my stock b936 vodafone NZ rom."
...
Thanks to:
Dazzozo and Fagulhas
Omegamoon
Geno
Code Aurora Forum
Cyda for Init.d support

Fork Me:
All my source is updated on GIT and I try to credit everything I do where needed.
https://github.com/PaulMilbank/g300_kernel
You can build this by using this guide:
http://forum.xda-developers.com/showthread.php?t=1577876
I use ubuntu 12.04 LTS and build off the g300_defconfig.

impresionante trabajo :ok:

ya lo añadi a la B6 de mi rom, va incluso mejor que antes :P

[imaginatelotumismo]

Una pregunta tonta, este kernel tiene la función NFC implementada, o es un modulo aparte

Enviado desde mi HUAWEI U8815N usando Tapatalk 2

[J.S]

Compañeros con este kernel, no habéis percatado de un rendimiento menor en juegos o es mi sensación???

Sent from my HUAWEI U8815 using Tapatalk 2

[vendaval13]

Yo lo probe en la B940, llevaba 5 min usándolo y se me reinicio navegando por internet, primera vez que se me reinicia solo el cel, decide probarlo un poco mas de tiempo pero al hacer un test con antutu se me volvio a reiniciar, asi que finalmente volvi a un backup anterior. En el hilo de modacco lei muy buenos comentarios, pero en mi caso funciono bastante mal :cry:.

[J.S]

en MoDaCo ha salido el nuevo kernel del miembro "PaulMilbank" que se puede flashear encima de cualquier ROM basada en Huawei stock ICS (p.e. B926 hasta B944, Infusion etc.)
NO sirve para CM9 o CM10 !!!
[Kernel] 308 Kernel for official ICS roms, #19 update 11/11/12 (http://www.modaco.com/topic/358992-kernel-308-kernel-for-official-ics-roms-19-update-111112/)
Está incluido en la B944 Stock + ROM de "Cyda"en la versión actual.

"What is it?
This is a kernel I have been working on for fun when I have time. It uses some commits from Daz and his ICS/JB kernel, Quite a few commits from Code Aurora Forum and a bit from Omegamoon and Geno. I have Also recycled some code from my previous 308 kernel for the Huawei X5/u8800.
I used the 3.08 kernel source from Huawei as a base and pulled the boot.img and config from my stock b936 vodafone NZ rom."
...
Thanks to:
Dazzozo and Fagulhas
Omegamoon
Geno
Code Aurora Forum
Cyda for Init.d support

Fork Me:
All my source is updated on GIT and I try to credit everything I do where needed.
https://github.com/PaulMilbank/g300_kernel
You can build this by using this guide:
http://forum.xda-developers.com/showthread.php?t=1577876
I use ubuntu 12.04 LTS and build off the g300_defconfig.

impresionante trabajo :ok:

Definitivamente no recomiendo este Kernel si utilizas tu terminal para juegos, aunque se trate de juegos con muy bajos recursos funcionan muy inestables.

Saludos