neroi_kiyoshi
12/05/12, 01:42:36
no se si esta bien escrito el titulo lo que pasa es que necesito instalar por adb para que me funciones el diag mode en mi r800x ya que le puse ics y no puedo entrar a ese modo hay un tutorial pero esta en ingles y no se me da nada pero espero que alguien de aqui me diga como tengo que empliear este tuto
So, here's the solution for everyone:
1. Unzip the attached archive.
2. adb shell, su, echo 1 > /sys/devices/virtual/usb_composite/modem/enable
3. Open Device Manager. Under unknown devices you'll find two "SEMC HSUSB" devices.
4. For both, install drivers from the folder.
You'll get unsigned driver warning, ignore and continue with installation.
5. Reboot phone.
6. adb shell, su, echo 1 > /sys/devices/virtual/usb_composite/diag/enable
7. QPST/CDMA workshop should detect the phone now.
I won't link QPST (I don't know if there are any copyright barriers), but you can find it extremely easy on Google. You want QPST 2.7 build 355.
If you're asked for SPC code, it's default 000000.
Now, I need testers: anyone with locked bootloader, or bootloader unlocked with Omnius/SEtool, please open EFS Explorer and tell me if there's anything inside cert, client-cert and client-key folders. Alternatively, try to find any SE/SEMC certificates in EFS.
ya tengo todo instalado sdk adb pero no entiendo nada de ahi
So, here's the solution for everyone:
1. Unzip the attached archive.
2. adb shell, su, echo 1 > /sys/devices/virtual/usb_composite/modem/enable
3. Open Device Manager. Under unknown devices you'll find two "SEMC HSUSB" devices.
4. For both, install drivers from the folder.
You'll get unsigned driver warning, ignore and continue with installation.
5. Reboot phone.
6. adb shell, su, echo 1 > /sys/devices/virtual/usb_composite/diag/enable
7. QPST/CDMA workshop should detect the phone now.
I won't link QPST (I don't know if there are any copyright barriers), but you can find it extremely easy on Google. You want QPST 2.7 build 355.
If you're asked for SPC code, it's default 000000.
Now, I need testers: anyone with locked bootloader, or bootloader unlocked with Omnius/SEtool, please open EFS Explorer and tell me if there's anything inside cert, client-cert and client-key folders. Alternatively, try to find any SE/SEMC certificates in EFS.
ya tengo todo instalado sdk adb pero no entiendo nada de ahi