Javielo1974
17/12/08, 10:52:41
Bueno, la espera ha sido un poco larga, pero el dreamteam, olinex , ha sacado ya el hspl, esta disponible ya en el foro de xda.
Cocineroooooooos! a los fogones!!!
http://forum.xda-developers.com/showthread.php?t=431217
os dejo el adjunto con los archivos, las instrucciones en ingles de xda, si me da tiempo esta tarde lo traduzco.
Un saludo.
P.D. Me estan entrando ganas de aprender a cocinar...
Preparacion:
0) Este pack es para dispositivos HD Blackstone BLAC100, de todos modos el instalador lo verifica. Si tu modelo es diferente contacta a Olinex para testearlo!!
1) asegurate de tener instalado en tu PC .NET framework. Si no, consiguelo aqui: http://www.microsoft.com/downloads/d...DisplayLang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=333325fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en)
2) Si usas Windows vista, se recomienda tener la actualizacion WMDC, consiguelo aqui: http://www.microsoft.com/windowsmobi...ce-center.mspx (http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx)
Instrucciones:
1) Extraer el HSPL del archivo adjunto (Unsigned_HardSPL_for_Blackstone_OliNex) a una carpeta vacia
2) Debes tener la PDA sincronizada con el PC a traves de Activesync!!!!!
3) Ejecuta HardSPLWrapper_Blackstone.exe en el PC, asegurate de hacerlo desde un disco del pc no desde una red, si usas windows vista ejecutalo desde la cuenta del administrador (recomendado)
4) Sigue los pasos que te indica el instalador, revisa la pda cuando aparezca la barra de carga y pincha en "si" si te lo pregunta.
5) Aclaraciones: Cuando el instalador te advierta de que que va a hacer un hard reset, no te preocupes, no lo hara (no borra los datos, ni nada). Cuando te diga que va a tardar 10 minutos, no le hagas caso, tarda alrededor de 1 minuto.
6) La pda tendria que mostrar una pantalla tricolor que dice: 1.07.OliNex, la version SSPL , esto es temporal.
7) De manera un tanto extraña, el instalador tardara unos cuantos segundos en detectar el dispositivo, pero no te preocupes, tan pronto como aparezca el texto "USB" en la pantalla tricolor, ya se habra detectado.
8) Flasheo del SPL, la PDA se reinicia sola, LISTO!!.
9) Para confirmar que se ha instalado correctamente, entra en modo bootloader (pantalla tricolor, pulsando volumen (-) y boton de encendido, los dos a la vez) , y verifica que pone "1.14.OliNex".
Creo que he hecho una traduccion bastante exacta del texto en ingles, de todos modos, usad esto, sabiendo que si algo le pasa a vuestra PDA, ni yo ni los autores del HSPL, somos responsables de ello.
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter SPL to check version, fully power the device off by long press of power key, then power on while holding the "volume down" key on the left side of the device. keep holding the volume down key until you see tricolour screen which is the bootloader mode, then release it.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-TouchHD.exe from SSPL-Manual-TouchHD.zip attachment to the device and run it. then once the screen is sayingn 1.07.OliNex, run RUU manually. i.e. you launch the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) on the PC and flash.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is posted in this post as well. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio.
NOTE 4: do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! nothing other than SPL's made by Olinex team (using OliNex custom cert) will flash to make SSPL more secure. if you want to flash some other rom, then use shipped RUU or blackstone customRUU if you need to flash cooked ROM.
NOTE 5: for developers asking: Hard-SPL is not based on MFG SPL, as that SPL causes the screen not to turn on after a resume. (maybe solved one day http://forum.xda-developers.com/images/smilies/smile.gif ). so currently, MFG SPL can strictly be used for development and hacking.
Troubleshooting:
- read the instructions above.
- read the instructions above.
- read the instructions above.
- anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-TouchHD.exe from SSPL-Manual-TouchHD.zip attachment to the device and run it. then once the screen is showing 1.07.OliNex, run RUU manually. i.e. you launch the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) on the PC and flash.
- if you get connection error in RUU after the device goes to 1.07.Olinex screen, then try a different USB port, also do not use USB hub, you can also try rebooting your PC, and can try using another PC. also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet.
- if SSPL-Manual.exe or Enterbootloader.exe fails to run (says missing component or similar), try a hard reset of the device.
- USB or connection error: as already said, in a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device. if not (happens very rarely), wait for RUU to time out (or wait 5 minutes). then remove back cover, reset, it will boot OS again, then you can retry unlocking process from step 1.
- USB or connection error: alternatively, launch SSPL-Manual.exe from attachment, run it, wait until 1.07.OliNex tricolour screen says "USB" on it, then run the HardSPLWrapper_Blackstone.exe on the PC.
Cocineroooooooos! a los fogones!!!
http://forum.xda-developers.com/showthread.php?t=431217
os dejo el adjunto con los archivos, las instrucciones en ingles de xda, si me da tiempo esta tarde lo traduzco.
Un saludo.
P.D. Me estan entrando ganas de aprender a cocinar...
Preparacion:
0) Este pack es para dispositivos HD Blackstone BLAC100, de todos modos el instalador lo verifica. Si tu modelo es diferente contacta a Olinex para testearlo!!
1) asegurate de tener instalado en tu PC .NET framework. Si no, consiguelo aqui: http://www.microsoft.com/downloads/d...DisplayLang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=333325fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en)
2) Si usas Windows vista, se recomienda tener la actualizacion WMDC, consiguelo aqui: http://www.microsoft.com/windowsmobi...ce-center.mspx (http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx)
Instrucciones:
1) Extraer el HSPL del archivo adjunto (Unsigned_HardSPL_for_Blackstone_OliNex) a una carpeta vacia
2) Debes tener la PDA sincronizada con el PC a traves de Activesync!!!!!
3) Ejecuta HardSPLWrapper_Blackstone.exe en el PC, asegurate de hacerlo desde un disco del pc no desde una red, si usas windows vista ejecutalo desde la cuenta del administrador (recomendado)
4) Sigue los pasos que te indica el instalador, revisa la pda cuando aparezca la barra de carga y pincha en "si" si te lo pregunta.
5) Aclaraciones: Cuando el instalador te advierta de que que va a hacer un hard reset, no te preocupes, no lo hara (no borra los datos, ni nada). Cuando te diga que va a tardar 10 minutos, no le hagas caso, tarda alrededor de 1 minuto.
6) La pda tendria que mostrar una pantalla tricolor que dice: 1.07.OliNex, la version SSPL , esto es temporal.
7) De manera un tanto extraña, el instalador tardara unos cuantos segundos en detectar el dispositivo, pero no te preocupes, tan pronto como aparezca el texto "USB" en la pantalla tricolor, ya se habra detectado.
8) Flasheo del SPL, la PDA se reinicia sola, LISTO!!.
9) Para confirmar que se ha instalado correctamente, entra en modo bootloader (pantalla tricolor, pulsando volumen (-) y boton de encendido, los dos a la vez) , y verifica que pone "1.14.OliNex".
Creo que he hecho una traduccion bastante exacta del texto en ingles, de todos modos, usad esto, sabiendo que si algo le pasa a vuestra PDA, ni yo ni los autores del HSPL, somos responsables de ello.
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter SPL to check version, fully power the device off by long press of power key, then power on while holding the "volume down" key on the left side of the device. keep holding the volume down key until you see tricolour screen which is the bootloader mode, then release it.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-TouchHD.exe from SSPL-Manual-TouchHD.zip attachment to the device and run it. then once the screen is sayingn 1.07.OliNex, run RUU manually. i.e. you launch the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) on the PC and flash.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is posted in this post as well. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio.
NOTE 4: do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! nothing other than SPL's made by Olinex team (using OliNex custom cert) will flash to make SSPL more secure. if you want to flash some other rom, then use shipped RUU or blackstone customRUU if you need to flash cooked ROM.
NOTE 5: for developers asking: Hard-SPL is not based on MFG SPL, as that SPL causes the screen not to turn on after a resume. (maybe solved one day http://forum.xda-developers.com/images/smilies/smile.gif ). so currently, MFG SPL can strictly be used for development and hacking.
Troubleshooting:
- read the instructions above.
- read the instructions above.
- read the instructions above.
- anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-TouchHD.exe from SSPL-Manual-TouchHD.zip attachment to the device and run it. then once the screen is showing 1.07.OliNex, run RUU manually. i.e. you launch the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) on the PC and flash.
- if you get connection error in RUU after the device goes to 1.07.Olinex screen, then try a different USB port, also do not use USB hub, you can also try rebooting your PC, and can try using another PC. also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet.
- if SSPL-Manual.exe or Enterbootloader.exe fails to run (says missing component or similar), try a hard reset of the device.
- USB or connection error: as already said, in a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device. if not (happens very rarely), wait for RUU to time out (or wait 5 minutes). then remove back cover, reset, it will boot OS again, then you can retry unlocking process from step 1.
- USB or connection error: alternatively, launch SSPL-Manual.exe from attachment, run it, wait until 1.07.OliNex tricolour screen says "USB" on it, then run the HardSPLWrapper_Blackstone.exe on the PC.