Adnachiel
06/09/15, 17:04:31
Buen día a todos,
Les comento lo siguiente, tenia instalado KK con Rom Slim Kat, quise pasarme a Lollipop y descargue el siguiente firmware
XT1032_FALCON-RETEU_5.0.2_LXB22.46-28.1_1_cid7_CFC_1FF.xml
y el equipo lo flashie con los siguientes comandos:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Termino el proceso y se quedo encendido y no paso nada ni vibro hasta que se descargo por estar con la pantalla encendida. Entonces volvi a flashear el firmware de KK
XT1032_CLARO-CL_4.4.4_KXB21.14-L1.40_37_cid12_CFC_1FF.xml
Con los siguientes comandos
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Y nada :(:(:( el equipo queda encendido y ya. Todo lo hice con ADT/SDK/platform-tools.
Agradezco de antemano las soluciones que me puedan brindar, ya que no se mas que hacer.
Saludos.
Les comento lo siguiente, tenia instalado KK con Rom Slim Kat, quise pasarme a Lollipop y descargue el siguiente firmware
XT1032_FALCON-RETEU_5.0.2_LXB22.46-28.1_1_cid7_CFC_1FF.xml
y el equipo lo flashie con los siguientes comandos:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Termino el proceso y se quedo encendido y no paso nada ni vibro hasta que se descargo por estar con la pantalla encendida. Entonces volvi a flashear el firmware de KK
XT1032_CLARO-CL_4.4.4_KXB21.14-L1.40_37_cid12_CFC_1FF.xml
Con los siguientes comandos
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Y nada :(:(:( el equipo queda encendido y ya. Todo lo hice con ADT/SDK/platform-tools.
Agradezco de antemano las soluciones que me puedan brindar, ya que no se mas que hacer.
Saludos.