#101
|
||||
|
||||
Solo una pergunta a quien haya instalado la ota han hecho diretamente reboot y install o han reiniciado manualmente? Creo que ese es el problema y he hecho reboot and install y se me quedó pillado ni siquiera el backup me salvo.... Solo hard reset.... Después instale la rom con el twrp 3.0.2.1 la del día 9 y sin problemas....
|
|
#102
|
||||
|
||||
Yo he instalado la OTA por "Reboot and Install" y tambien se me ha quedado pillado en recovery. He tenido que al recovery de stock y luego al 3.0.2.1 y ya funcionaba bien. Habra que ver que tal va esta actualizacion. Por ahora los errores que he encontrado han sido:
-La pantalla se mantiene encendida si se carga el telefono apagado. -El volumen de la musica cuando estas con auriculares sube bastante en repetidas ocasiones con el reproductor por defecto (No he probado con otros). -La galería por defecto tarda en renderizar las imagenes (En otras de terceros no pasa). -Algún que otro crasheo puntual. Por lo demás va mejor que stock en cuanto a rendimiento, batería y funcionalidades. ¡Seguid así! |
#103
|
||||
|
||||
Acabo de conseguir instalar la NIGHTLY de hoy.
He formateado todo (Limpieza de todas las particiones + formateo). Acto seguido he flaseado el zip de la NIGHTLY de hoy y de momento arranca. (Me falta ponerle las gapps) |
Gracias de parte de: | ||
#104
|
||||
|
||||
Apagado
Última edición por quintas84 Día 09/12/16 a las 18:55:08. |
#105
|
||||
|
||||
Lo he intentado todo, poniendo otra rom, otro recovery, varios y diferentes wipes... Pero lo que has dicho tú me ha funcionado, muchas gracias. Un saludo. |
#106
|
||||
|
||||
Bueno, tras un dia de uso y de toqueteo para probarla al 100%, he encontrado una serie de bugs, errores que no se si seran solo mios o en general:
- En primer lugar, faltan multiples traducciones (aunque esto no es nada grave ni mucho menos) - El led se puede personalizar pero no parpadea al personalizarlo (en grupos de whatsapp parpadea cuando quiere) - En la SIM 2 no coge señal - Los datos en la SIM 1 van bien, y al rato empiezan a ralentizarse hasta quedarte sin conexion, sin que funcionen vaya - Al cargar apagado, la pantalla se queda encendida - Este es una tontada, pero no se puede cambiar la foto de usuario (ese circulito pequeño que aparece en la esquina superior derecha) - A veces la galeria se bugea y no muestra las fotos, pocas veces. Respecto a lo demas, lo mas conflictivo que podia ser el GPS, funciona perfectamente, los sonidos, tanto audios de whatsapp, llamadas etc va todo genial, fluidez espectacular, bateria muy muy decente y la camara yo tambien la noto con mejoria En mi caso hice la instalacion mas limpia que se podia hacer, Hard Reset a las 4.5.0, luego instalar TWRP, despues la rom, las gapps, wipes etc y configurar todo de 0. Me vuelvo a CM13 porque el tema de la SIM 2 me afecta, ya q en mi movil la SIM1 no funciona bien, y ademas los datos me van mal(descartado que sea de mi compañia)...espero que todos estos errores se puedan arreglar ya que hay alguno importante, pero no entiendo muy bien lo de kratos y las nightlies, si el puede arreglar estas cosas o las arreglan las nighlies etc... Espero que os sirva y ayude mi experiencia. Última edición por Arru99 Día 09/12/16 a las 20:08:19. |
#107
|
||||
|
||||
@Kra1o5 tienes alguna idea de porque después de actualizar a la nightly de hoy el twrp ha entrado en bootloop? Habría alguna soluciõn que no el Hard reset? Muchas gracias y perdón por el incómodo
Última edición por quintas84 Día 09/12/16 a las 20:45:38. |
#108
|
||||
|
||||
@Kra1o5 mi duda y la de la mayoria es si estos fallos que hemos encontrado se iran corrigiendo en posteriores actualizaciones, o los corregiras tu o como? Me encanta la ROM y con solo pulirla un poquito mas tiene que ser genial...muchas gracias y apreciamos tu trabajo, de verdad.
|
#109
|
||||
|
||||
He sufrido el problema del bootloop.. he tenido que volver a la 7.0 con el recovery 3.0.2.2, para después volver a instalar la 7.1 con la primera build. Espero en futuras no vuelva a ocurrir, ha sido una faena.
Enviado desde mi Aquaris E5 mediante Tapatalk |
#110
|
||||
|
||||
Yo he instalado la build de hoy 9 de diciembre sin problema, pero el principal fallo es que los datos de mi sim1 se bloquean (los de la sim2 no los he probado), por mucho que los desactivas y vuelves a activar no funcionan. La única solución es el reinicio del terminal.
Por si a alguien le sirve, logcat cuando apago y enciendo datos: 12-10 00:55:13.208 285 477 D audio_hw_primary: start_output_stream: enter: stream(0xb61bbf40)usecase(1: low-latency-playback) devices(0x2) 12-10 00:55:13.208 285 477 D audio_hw_primary: select_devices: out_snd_device(2: speaker) in_snd_device(0: ) 12-10 00:55:13.208 285 477 W msm8916_platform: Codec backend bitwidth 16, samplerate 48000 12-10 00:55:13.208 285 477 D hardware_info: hw_info_append_hw_type : device_name = speaker 12-10 00:55:13.208 285 477 D audio_hw_primary: enable_snd_device: snd_device(2: speaker) 12-10 00:55:13.213 285 477 W audio_hw_utils: audio_extn_utils_update_stream_app_type_cfg: App type could not be selected. Falling back to default 12-10 00:55:13.213 285 477 I audio_hw_primary: select_devices Selected apptype: 69936 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> send_audio_cal, acdb_id = 14, path = 0 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> send_asm_topology 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_STREAM_TOPOLOGY_ID 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> send_adm_topology 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_COMMON_TOPOLOGY_ID 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> send_audtable 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_COMMON_TABLE_SIZE 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_COMMON_TABLE 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> AUDIO_SET_AUDPROC_CAL 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> send_audvoltable 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_GAIN_DEP_STEP_TABLE 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> AUDIO_SET_AUDPROC_VOL_CAL 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> send_afe_cal 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AFE_COMMON_TABLE 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> AUDIO_SET_AFE_CAL 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> send_hw_delay : acdb_id = 14 path = 0 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> ACDB_AVSYNC_INFO: ACDB_CMD_GET_DEVICE_PROPERTY 12-10 00:55:13.213 285 477 I audio_hw_utils: audio_extn_utils_send_app_type_cfg app_type 69936, acdb_dev_id 14, sample_rate 48000 12-10 00:55:13.213 285 477 D audio_hw_primary: enable_audio_route: apply mixer and update path: low-latency-playback 12-10 00:55:13.214 285 477 D audio_hw_primary: select_devices: done 12-10 00:55:13.231 285 477 D msm8916_platform: platform_set_channel_map mixer_ctl_name:Playback Channel Map12 12-10 00:55:13.231 285 477 D msm8916_platform: platform_set_channel_map: set mapping(1 2 3 0 0 0 0 0) for channel:2 12-10 00:55:13.231 285 477 D audio_hw_primary: start_output_stream: exit 12-10 00:55:14.985 17683 17683 D TelephonyManager: setDataEnabled: enabled=false 12-10 00:55:15.050 717 2450 W InputMethodManagerService: Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub$ Proxy@3ccf5b9 attribute=null, token = android.os.BinderProxy@e53d44d 12-10 00:55:16.806 17683 17683 D TelephonyManager: setDataEnabled: enabled=true 12-10 00:55:19.898 285 477 D audio_hw_primary: out_standby: enter: stream (0xb61bbf40) usecase(1: low-latency-playback) 12-10 00:55:19.990 2320 2320 D wpa_supplicant: wlan0: Control interface command 'SCAN TYPE=ONLY' 12-10 00:55:19.990 2320 2320 D wpa_supplicant: wlan0: Setting scan request: 0.000000 sec 12-10 00:55:19.991 2320 2320 D wpa_supplicant: CTRL-DEBUG: global_ctrl_sock-sendto: sock=8 sndbuf=163840 outq=0 send_len=3 12-10 00:55:19.991 2320 2320 D wpa_supplicant: wlan0: No enabled networks (4 disabled networks) 12-10 00:55:19.991 2320 2320 D wpa_supplicant: wlan0: State: DISCONNECTED -> SCANNING 12-10 00:55:19.991 2320 2320 D wpa_supplicant: CTRL-DEBUG: ctrl_sock-sendmsg: sock=8 sndbuf=163840 outq=448 send_len=67 12-10 00:55:19.991 2320 2320 D wpa_supplicant: CTRL_IFACE monitor sent successfully to /data/misc/wifi/sockets/wpa_ctrl_717-2\x00 12-10 00:55:19.992 2320 2320 D wpa_supplicant: wlan0: Determining shared radio frequencies (max len 2) 12-10 00:55:19.992 2320 2320 D wpa_supplicant: wlan0: Shared frequencies (len=0): completed iteration 12-10 00:55:19.992 2320 2320 D wpa_supplicant: P2P: Add operating class 81 12-10 00:55:19.992 2320 2320 D wpa_supplicant: P2P: Channels - hexdump(len=13): 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 12-10 00:55:19.992 2320 2320 D wpa_supplicant: P2P: Update channel list 12-10 00:55:19.992 2320 2320 D wpa_supplicant: P2P: channels: 81:1,2,3,4,5,6,7,8,9,10,11,12,13 12-10 00:55:19.992 2320 2320 D wpa_supplicant: P2P: cli_channels: 12-10 00:55:19.992 2320 2320 D wpa_supplicant: wlan0: Starting AP scan for wildcard SSID 12-10 00:55:19.992 2320 2320 D wpa_supplicant: wlan0: Add radio work 'scan'@0xb6821270 12-10 00:55:19.992 2320 2320 D wpa_supplicant: wlan0: First radio work item in the queue - schedule start immediately 12-10 00:55:19.993 2320 2320 D wpa_supplicant: wlan0: Starting radio work 'scan'@0xb6821270 after 0.000187 second wait 12-10 00:55:19.993 2320 2320 D wpa_supplicant: wlan0: nl80211: scan request 12-10 00:55:19.993 2320 2320 D wpa_supplicant: nl80211: Scan SSID - hexdump(len=0): [NULL] 12-10 00:55:19.993 2320 2320 D wpa_supplicant: nl80211: Scan extra IEs - hexdump(len=7): 7f 05 00 00 0a 02 01 12-10 00:55:19.994 2320 2320 D wpa_supplicant: Scan requested (ret=0) - scan timeout 30 seconds 12-10 00:55:19.994 2320 2320 D wpa_supplicant: nl80211: Event message available 12-10 00:55:19.994 2320 2320 D wpa_supplicant: nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0 12-10 00:55:19.995 2320 2320 D wpa_supplicant: wlan0: nl80211: Scan trigger 12-10 00:55:19.995 2320 2320 D wpa_supplicant: wlan0: Event SCAN_STARTED (47) received 12-10 00:55:19.995 2320 2320 D wpa_supplicant: wlan0: Own scan request started a scan in 0.000411 seconds 12-10 00:55:19.995 2320 2320 D wpa_supplicant: CTRL-DEBUG: ctrl_sock-sendmsg: sock=8 sndbuf=163840 outq=448 send_len=24 12-10 00:55:19.995 2320 2320 D wpa_supplicant: CTRL_IFACE monitor sent successfully to /data/misc/wifi/sockets/wpa_ctrl_717-2\x00 12-10 00:55:20.008 285 477 D audio_hw_primary: disable_audio_route: reset and update mixer path: low-latency-playback 12-10 00:55:20.010 285 477 D hardware_info: hw_info_append_hw_type : device_name = speaker 12-10 00:55:20.010 285 477 D audio_hw_primary: disable_snd_device: snd_device(2: speaker) 12-10 00:55:20.565 2320 2320 D wpa_supplicant: nl80211: Event message available 12-10 00:55:20.566 2320 2320 D wpa_supplicant: nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0 12-10 00:55:20.566 2320 2320 D wpa_supplicant: wlan0: nl80211: New scan results available 12-10 00:55:20.566 2320 2320 D wpa_supplicant: nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 12-10 00:55:20.566 2320 2320 D wpa_supplicant: wlan0: Event SCAN_RESULTS (3) received 12-10 00:55:20.566 2320 2320 D wpa_supplicant: wlan0: Scan completed in 0.571563 seconds 12-10 00:55:20.567 2320 2320 D wpa_supplicant: nl80211: Received scan results (4 BSSes) 12-10 00:55:20.567 2320 2320 D wpa_supplicant: wlan0: BSS: Start scan result update 212 12-10 00:55:20.568 2320 2320 D wpa_supplicant: BSS: last_scan_res_used=4/32 12-10 00:55:20.568 2320 2320 D wpa_supplicant: wlan0: Scan-only results received 12-10 00:55:20.568 2320 2320 D wpa_supplicant: CTRL-DEBUG: ctrl_sock-sendmsg: sock=8 sndbuf=163840 outq=0 send_len=24 12-10 00:55:20.570 2320 2320 D wpa_supplicant: CTRL_IFACE monitor sent successfully to /data/misc/wifi/sockets/wpa_ctrl_717-2\x00 12-10 00:55:20.571 2320 2320 D wpa_supplicant: wlan0: Radio work 'scan'@0xb6821270 done in 0.577944 seconds 12-10 00:55:20.571 2320 2320 D wpa_supplicant: wlan0: radio_work_free('scan'@0xb6821270: num_active_works --> 0 12-10 00:55:20.575 2320 2320 D wpa_supplicant: wlan0: State: SCANNING -> DISCONNECTED 12-10 00:55:20.575 2320 2320 D wpa_supplicant: nl80211: Set wlan0 operstate 0->0 (DORMANT) 12-10 00:55:20.575 2320 2320 D wpa_supplicant: netlink: Operstate: ifindex=16 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) 12-10 00:55:20.575 2320 2320 D wpa_supplicant: CTRL-DEBUG: ctrl_sock-sendmsg: sock=8 sndbuf=163840 outq=0 send_len=67 12-10 00:55:20.576 2320 2320 D wpa_supplicant: CTRL_IFACE monitor sent successfully to /data/misc/wifi/sockets/wpa_ctrl_717-2\x00 12-10 00:55:20.576 2320 2320 D wpa_supplicant: wlan0: Determining shared radio frequencies (max len 2) 12-10 00:55:20.576 2320 2320 D wpa_supplicant: wlan0: Shared frequencies (len=0): completed iteration 12-10 00:55:20.576 2320 2320 D wpa_supplicant: P2P: Add operating class 81 12-10 00:55:20.576 2320 2320 D wpa_supplicant: P2P: Channels - hexdump(len=13): 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 12-10 00:55:20.577 2320 2320 D wpa_supplicant: P2P: Update channel list 12-10 00:55:20.577 2320 2320 D wpa_supplicant: P2P: channels: 81:1,2,3,4,5,6,7,8,9,10,11,12,13 12-10 00:55:20.577 2320 2320 D wpa_supplicant: P2P: cli_channels: 12-10 00:55:20.591 2320 2320 D wpa_supplicant: CTRL-DEBUG: global_ctrl_sock-sendto: sock=8 sndbuf=163840 outq=0 send_len=3828 12-10 00:55:20.604 2320 2320 D wpa_supplicant: CTRL-DEBUG: global_ctrl_sock-sendto: sock=8 sndbuf=163840 outq=0 send_len=3828 12-10 00:55:20.616 2320 2320 D wpa_supplicant: CTRL-DEBUG: global_ctrl_sock-sendto: sock=8 sndbuf=163840 outq=0 send_len=821 12-10 00:55:20.619 2320 2320 D wpa_supplicant: CTRL-DEBUG: global_ctrl_sock-sendto: sock=8 sndbuf=163840 outq=0 send_len=821 12-10 00:55:20.620 2320 2320 D wpa_supplicant: CTRL-DEBUG: global_ctrl_sock-sendto: sock=8 sndbuf=163840 outq=0 send_len=0 12-10 00:55:20.624 2320 2320 D wpa_supplicant: CTRL-DEBUG: global_ctrl_sock-sendto: sock=8 sndbuf=163840 outq=0 send_len=0 12-10 00:55:20.659 717 717 E LocSvc_flp: I/===> int flp_inject_location(FlpLocation*) line 253 12-10 00:55:20.659 717 717 E : I/===> int FlpLocationClient::flp_inject_location(FlpExtLocat ion*) line 265 12-10 00:55:20.659 717 2601 E LocSvc_api_v02: I/---> locClientSendReq line 2021 QMI_LOC_INJECT_POSITION_REQ_V02 12-10 00:55:20.661 717 745 E LocSvc_eng: I/===> int loc_eng_inject_location(loc_eng_data_s_type &, double, double, float) line 2080 12-10 00:55:20.661 6958 6978 D Stumbler_GPSScanner: Discard fused/network location. 12-10 00:55:20.667 717 2611 E LocSvc_ApiV02: I/<--- void globalRespCb(locClientHandleType, uint32_t, locClientRespIndUnionType, uint32_t, void*) line 117 QMI_LOC_INJECT_POSITION_REQ_V02 12-10 00:55:20.667 717 2601 E LocSvc_api_v02: I/---> locClientSendReq line 2021 QMI_LOC_INJECT_POSITION_REQ_V02 12-10 00:55:20.669 717 2622 E LocSvc_ApiV02: I/<--- void globalRespCb(locClientHandleType, uint32_t, locClientRespIndUnionType, uint32_t, void*) line 117 QMI_LOC_INJECT_POSITION_REQ_V02 12-10 00:55:20.685 5499 6713 W GCoreUlr: Received locations too frequently: Location[fused 42,594775,-8,753839 acc=19 et=+5h0m22s965ms {Bundle[{wifiScan=[B@fc3a7c2, noGPSLocation=Location[fused 42,594775,-8,753839 acc=19 et=+5h0m22s965ms {Bundle[mParcelledData.dataSize=188]}], locationType=3}]}], Location[fused 42,594933,-8,753753 acc=453 et=+4h34m34s32ms {Bundle[mParcelledData.dataSize=480]}] 12-10 00:55:20.686 5499 5851 W ctxmgr : [ContextSpecificAclFactory]LocationConsent failed, ULR opt-in status is: false, account#-1474264834# 12-10 00:55:20.687 5499 6713 W GCoreUlr: Received locations too frequently: Location[fused 42,594775,-8,753839 acc=19 et=+5h0m22s965ms {Bundle[{wifiScan=[B@fc3a7c2, noGPSLocation=Location[fused 42,594775,-8,753839 acc=19 et=+5h0m22s965ms {Bundle[mParcelledData.dataSize=188]}], locationType=3}]}], Location[fused 42,594699,-8,753839 acc=20 et=+4h57m41s970ms {Bundle[mParcelledData.dataSize=612]}] 12-10 00:55:20.687 5499 5851 W ctxmgr : [AclManager]No 2 for (accnt=account#-1474264834#, com.google.android.gms(10032):UserLocationProducer , vrsn=10084000, 0, 3pPkg = null , 3pMdlId = null). Was: 2 for 1, account#-1474264834# 12-10 00:55:20.691 5499 5851 W ctxmgr : [ContextSpecificAclFactory]LocationConsent failed, ULR opt-in status is: false, account#2061052593# 12-10 00:55:20.691 5499 5851 W ctxmgr : [AclManager]No 2 for (accnt=account#2061052593#, com.google.android.gms(10032):UserLocationProducer , vrsn=10084000, 0, 3pPkg = null , 3pMdlId = null). Was: 2 for 1, account#2061052593# 12-10 00:55:20.698 5499 6713 I GCoreUlr: Successfully inserted 1 locations Última edición por dosdo Día 10/12/16 a las 00:57:31. |
#111
|
||||
|
||||
Hola, no consigo salir del recoger y desde que actulice t vía OTA I la rom del día 9. Me podrías detallar como lo has hecho . Gracias
|
#112
|
||||
|
||||
|
#113
|
||||
|
||||
Para todos los que estéis teniendo esos bugs
Supongo que, al ser nightlies, se irá actualizando la ROM y todos esos bugs se irán puliendo. Lo mejor es que si se os hace inviable volváis a cm13 y volváis dentro de un tiempo. Yo por mi parte no tengo ningún problema, espero que siga así. Buen trabajo Kratos Enviado desde mi Aquaris E5 mediante Tapatalk
__________________
Disfrutando del bq Aquaris E5 4G
|
#114
|
||||
|
||||
Yo he instalado la build de hoy 9 de diciembre sin problema, pero el principal fallo es que los datos de mi sim1 se bloquean (los de la sim2 no los he probado), por mucho que los desactivas y vuelves a activar no funcionan. La única solución es el reinicio del terminal.
Por si a alguien le sirve, logcat cuando apago y enciendo datos: 12-10 00:55:13.208 285 477 D audio_hw_primary: start_output_stream: enter: stream(0xb61bbf40)usecase(1: low-latency-playback) devices(0x2) 12-10 00:55:13.208 285 477 D audio_hw_primary: select_devices: out_snd_device(2: speaker) in_snd_device(0: ) 12-10 00:55:13.208 285 477 W msm8916_platform: Codec backend bitwidth 16, samplerate 48000 12-10 00:55:13.208 285 477 D hardware_info: hw_info_append_hw_type : device_name = speaker 12-10 00:55:13.208 285 477 D audio_hw_primary: enable_snd_device: snd_device(2: speaker) 12-10 00:55:13.213 285 477 W audio_hw_utils: audio_extn_utils_update_stream_app_type_cfg: App type could not be selected. Falling back to default 12-10 00:55:13.213 285 477 I audio_hw_primary: select_devices Selected apptype: 69936 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> send_audio_cal, acdb_id = 14, path = 0 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> send_asm_topology 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_STREAM_TOPOLOGY_ID 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> send_adm_topology 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_COMMON_TOPOLOGY_ID 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> send_audtable 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_COMMON_TABLE_SIZE 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_COMMON_TABLE 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> AUDIO_SET_AUDPROC_CAL 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> send_audvoltable 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_GAIN_DEP_STEP_TABLE 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> AUDIO_SET_AUDPROC_VOL_CAL 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> send_afe_cal 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AFE_COMMON_TABLE 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> AUDIO_SET_AFE_CAL 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> send_hw_delay : acdb_id = 14 path = 0 12-10 00:55:13.213 285 477 D ACDB-LOADER: ACDB -> ACDB_AVSYNC_INFO: ACDB_CMD_GET_DEVICE_PROPERTY 12-10 00:55:13.213 285 477 I audio_hw_utils: audio_extn_utils_send_app_type_cfg app_type 69936, acdb_dev_id 14, sample_rate 48000 12-10 00:55:13.213 285 477 D audio_hw_primary: enable_audio_route: apply mixer and update path: low-latency-playback 12-10 00:55:13.214 285 477 D audio_hw_primary: select_devices: done 12-10 00:55:13.231 285 477 D msm8916_platform: platform_set_channel_map mixer_ctl_name:Playback Channel Map12 12-10 00:55:13.231 285 477 D msm8916_platform: platform_set_channel_map: set mapping(1 2 3 0 0 0 0 0) for channel:2 12-10 00:55:13.231 285 477 D audio_hw_primary: start_output_stream: exit 12-10 00:55:14.985 17683 17683 D TelephonyManager: setDataEnabled: enabled=false 12-10 00:55:15.050 717 2450 W InputMethodManagerService: Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub$ Proxy@3ccf5b9 attribute=null, token = android.os.BinderProxy@e53d44d 12-10 00:55:16.806 17683 17683 D TelephonyManager: setDataEnabled: enabled=true 12-10 00:55:19.898 285 477 D audio_hw_primary: out_standby: enter: stream (0xb61bbf40) usecase(1: low-latency-playback) 12-10 00:55:19.990 2320 2320 D wpa_supplicant: wlan0: Control interface command 'SCAN TYPE=ONLY' 12-10 00:55:19.990 2320 2320 D wpa_supplicant: wlan0: Setting scan request: 0.000000 sec 12-10 00:55:19.991 2320 2320 D wpa_supplicant: CTRL-DEBUG: global_ctrl_sock-sendto: sock=8 sndbuf=163840 outq=0 send_len=3 12-10 00:55:19.991 2320 2320 D wpa_supplicant: wlan0: No enabled networks (4 disabled networks) 12-10 00:55:19.991 2320 2320 D wpa_supplicant: wlan0: State: DISCONNECTED -> SCANNING 12-10 00:55:19.991 2320 2320 D wpa_supplicant: CTRL-DEBUG: ctrl_sock-sendmsg: sock=8 sndbuf=163840 outq=448 send_len=67 12-10 00:55:19.991 2320 2320 D wpa_supplicant: CTRL_IFACE monitor sent successfully to /data/misc/wifi/sockets/wpa_ctrl_717-2\x00 12-10 00:55:19.992 2320 2320 D wpa_supplicant: wlan0: Determining shared radio frequencies (max len 2) 12-10 00:55:19.992 2320 2320 D wpa_supplicant: wlan0: Shared frequencies (len=0): completed iteration 12-10 00:55:19.992 2320 2320 D wpa_supplicant: P2P: Add operating class 81 12-10 00:55:19.992 2320 2320 D wpa_supplicant: P2P: Channels - hexdump(len=13): 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 12-10 00:55:19.992 2320 2320 D wpa_supplicant: P2P: Update channel list 12-10 00:55:19.992 2320 2320 D wpa_supplicant: P2P: channels: 81:1,2,3,4,5,6,7,8,9,10,11,12,13 12-10 00:55:19.992 2320 2320 D wpa_supplicant: P2P: cli_channels: 12-10 00:55:19.992 2320 2320 D wpa_supplicant: wlan0: Starting AP scan for wildcard SSID 12-10 00:55:19.992 2320 2320 D wpa_supplicant: wlan0: Add radio work 'scan'@0xb6821270 12-10 00:55:19.992 2320 2320 D wpa_supplicant: wlan0: First radio work item in the queue - schedule start immediately 12-10 00:55:19.993 2320 2320 D wpa_supplicant: wlan0: Starting radio work 'scan'@0xb6821270 after 0.000187 second wait 12-10 00:55:19.993 2320 2320 D wpa_supplicant: wlan0: nl80211: scan request 12-10 00:55:19.993 2320 2320 D wpa_supplicant: nl80211: Scan SSID - hexdump(len=0): [NULL] 12-10 00:55:19.993 2320 2320 D wpa_supplicant: nl80211: Scan extra IEs - hexdump(len=7): 7f 05 00 00 0a 02 01 12-10 00:55:19.994 2320 2320 D wpa_supplicant: Scan requested (ret=0) - scan timeout 30 seconds 12-10 00:55:19.994 2320 2320 D wpa_supplicant: nl80211: Event message available 12-10 00:55:19.994 2320 2320 D wpa_supplicant: nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0 12-10 00:55:19.995 2320 2320 D wpa_supplicant: wlan0: nl80211: Scan trigger 12-10 00:55:19.995 2320 2320 D wpa_supplicant: wlan0: Event SCAN_STARTED (47) received 12-10 00:55:19.995 2320 2320 D wpa_supplicant: wlan0: Own scan request started a scan in 0.000411 seconds 12-10 00:55:19.995 2320 2320 D wpa_supplicant: CTRL-DEBUG: ctrl_sock-sendmsg: sock=8 sndbuf=163840 outq=448 send_len=24 12-10 00:55:19.995 2320 2320 D wpa_supplicant: CTRL_IFACE monitor sent successfully to /data/misc/wifi/sockets/wpa_ctrl_717-2\x00 12-10 00:55:20.008 285 477 D audio_hw_primary: disable_audio_route: reset and update mixer path: low-latency-playback 12-10 00:55:20.010 285 477 D hardware_info: hw_info_append_hw_type : device_name = speaker 12-10 00:55:20.010 285 477 D audio_hw_primary: disable_snd_device: snd_device(2: speaker) 12-10 00:55:20.565 2320 2320 D wpa_supplicant: nl80211: Event message available 12-10 00:55:20.566 2320 2320 D wpa_supplicant: nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0 12-10 00:55:20.566 2320 2320 D wpa_supplicant: wlan0: nl80211: New scan results available 12-10 00:55:20.566 2320 2320 D wpa_supplicant: nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 12-10 00:55:20.566 2320 2320 D wpa_supplicant: wlan0: Event SCAN_RESULTS (3) received 12-10 00:55:20.566 2320 2320 D wpa_supplicant: wlan0: Scan completed in 0.571563 seconds 12-10 00:55:20.567 2320 2320 D wpa_supplicant: nl80211: Received scan results (4 BSSes) 12-10 00:55:20.567 2320 2320 D wpa_supplicant: wlan0: BSS: Start scan result update 212 12-10 00:55:20.568 2320 2320 D wpa_supplicant: BSS: last_scan_res_used=4/32 12-10 00:55:20.568 2320 2320 D wpa_supplicant: wlan0: Scan-only results received 12-10 00:55:20.568 2320 2320 D wpa_supplicant: CTRL-DEBUG: ctrl_sock-sendmsg: sock=8 sndbuf=163840 outq=0 send_len=24 12-10 00:55:20.570 2320 2320 D wpa_supplicant: CTRL_IFACE monitor sent successfully to /data/misc/wifi/sockets/wpa_ctrl_717-2\x00 12-10 00:55:20.571 2320 2320 D wpa_supplicant: wlan0: Radio work 'scan'@0xb6821270 done in 0.577944 seconds 12-10 00:55:20.571 2320 2320 D wpa_supplicant: wlan0: radio_work_free('scan'@0xb6821270: num_active_works --> 0 12-10 00:55:20.575 2320 2320 D wpa_supplicant: wlan0: State: SCANNING -> DISCONNECTED 12-10 00:55:20.575 2320 2320 D wpa_supplicant: nl80211: Set wlan0 operstate 0->0 (DORMANT) 12-10 00:55:20.575 2320 2320 D wpa_supplicant: netlink: Operstate: ifindex=16 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) 12-10 00:55:20.575 2320 2320 D wpa_supplicant: CTRL-DEBUG: ctrl_sock-sendmsg: sock=8 sndbuf=163840 outq=0 send_len=67 12-10 00:55:20.576 2320 2320 D wpa_supplicant: CTRL_IFACE monitor sent successfully to /data/misc/wifi/sockets/wpa_ctrl_717-2\x00 12-10 00:55:20.576 2320 2320 D wpa_supplicant: wlan0: Determining shared radio frequencies (max len 2) 12-10 00:55:20.576 2320 2320 D wpa_supplicant: wlan0: Shared frequencies (len=0): completed iteration 12-10 00:55:20.576 2320 2320 D wpa_supplicant: P2P: Add operating class 81 12-10 00:55:20.576 2320 2320 D wpa_supplicant: P2P: Channels - hexdump(len=13): 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 12-10 00:55:20.577 2320 2320 D wpa_supplicant: P2P: Update channel list 12-10 00:55:20.577 2320 2320 D wpa_supplicant: P2P: channels: 81:1,2,3,4,5,6,7,8,9,10,11,12,13 12-10 00:55:20.577 2320 2320 D wpa_supplicant: P2P: cli_channels: 12-10 00:55:20.591 2320 2320 D wpa_supplicant: CTRL-DEBUG: global_ctrl_sock-sendto: sock=8 sndbuf=163840 outq=0 send_len=3828 12-10 00:55:20.604 2320 2320 D wpa_supplicant: CTRL-DEBUG: global_ctrl_sock-sendto: sock=8 sndbuf=163840 outq=0 send_len=3828 12-10 00:55:20.616 2320 2320 D wpa_supplicant: CTRL-DEBUG: global_ctrl_sock-sendto: sock=8 sndbuf=163840 outq=0 send_len=821 12-10 00:55:20.619 2320 2320 D wpa_supplicant: CTRL-DEBUG: global_ctrl_sock-sendto: sock=8 sndbuf=163840 outq=0 send_len=821 12-10 00:55:20.620 2320 2320 D wpa_supplicant: CTRL-DEBUG: global_ctrl_sock-sendto: sock=8 sndbuf=163840 outq=0 send_len=0 12-10 00:55:20.624 2320 2320 D wpa_supplicant: CTRL-DEBUG: global_ctrl_sock-sendto: sock=8 sndbuf=163840 outq=0 send_len=0 12-10 00:55:20.659 717 717 E LocSvc_flp: I/===> int flp_inject_location(FlpLocation*) line 253 12-10 00:55:20.659 717 717 E : I/===> int FlpLocationClient::flp_inject_location(FlpExtLocat ion*) line 265 12-10 00:55:20.659 717 2601 E LocSvc_api_v02: I/---> locClientSendReq line 2021 QMI_LOC_INJECT_POSITION_REQ_V02 12-10 00:55:20.661 717 745 E LocSvc_eng: I/===> int loc_eng_inject_location(loc_eng_data_s_type &, double, double, float) line 2080 12-10 00:55:20.661 6958 6978 D Stumbler_GPSScanner: Discard fused/network location. 12-10 00:55:20.667 717 2611 E LocSvc_ApiV02: I/<--- void globalRespCb(locClientHandleType, uint32_t, locClientRespIndUnionType, uint32_t, void*) line 117 QMI_LOC_INJECT_POSITION_REQ_V02 12-10 00:55:20.667 717 2601 E LocSvc_api_v02: I/---> locClientSendReq line 2021 QMI_LOC_INJECT_POSITION_REQ_V02 12-10 00:55:20.669 717 2622 E LocSvc_ApiV02: I/<--- void globalRespCb(locClientHandleType, uint32_t, locClientRespIndUnionType, uint32_t, void*) line 117 QMI_LOC_INJECT_POSITION_REQ_V02 12-10 00:55:20.685 5499 6713 W GCoreUlr: Received locations too frequently: Location[fused 42,594775,-8,753839 acc=19 et=+5h0m22s965ms {Bundle[{wifiScan=[B@fc3a7c2, noGPSLocation=Location[fused 42,594775,-8,753839 acc=19 et=+5h0m22s965ms {Bundle[mParcelledData.dataSize=188]}], locationType=3}]}], Location[fused 42,594933,-8,753753 acc=453 et=+4h34m34s32ms {Bundle[mParcelledData.dataSize=480]}] 12-10 00:55:20.686 5499 5851 W ctxmgr : [ContextSpecificAclFactory]LocationConsent failed, ULR opt-in status is: false, account#-1474264834# 12-10 00:55:20.687 5499 6713 W GCoreUlr: Received locations too frequently: Location[fused 42,594775,-8,753839 acc=19 et=+5h0m22s965ms {Bundle[{wifiScan=[B@fc3a7c2, noGPSLocation=Location[fused 42,594775,-8,753839 acc=19 et=+5h0m22s965ms {Bundle[mParcelledData.dataSize=188]}], locationType=3}]}], Location[fused 42,594699,-8,753839 acc=20 et=+4h57m41s970ms {Bundle[mParcelledData.dataSize=612]}] 12-10 00:55:20.687 5499 5851 W ctxmgr : [AclManager]No 2 for (accnt=account#-1474264834#, com.google.android.gms(10032):UserLocationProducer , vrsn=10084000, 0, 3pPkg = null , 3pMdlId = null). Was: 2 for 1, account#-1474264834# 12-10 00:55:20.691 5499 5851 W ctxmgr : [ContextSpecificAclFactory]LocationConsent failed, ULR opt-in status is: false, account#2061052593# 12-10 00:55:20.691 5499 5851 W ctxmgr : [AclManager]No 2 for (accnt=account#2061052593#, com.google.android.gms(10032):UserLocationProducer , vrsn=10084000, 0, 3pPkg = null , 3pMdlId = null). Was: 2 for 1, account#2061052593# 12-10 00:55:20.698 5499 6713 I GCoreUlr: Successfully inserted 1 locations Enviado desde mi Aquaris E5 mediante Tapatalk
__________________
Disfrutando del bq Aquaris E5 4G
|
#115
|
||||
|
||||
Hola de nuevo.
Sigo atrapado en el tprw , tengo instalado el último. Se me quedo enganchado al actualizar por OTA la rom del 9. He hecho todos lo wipes menos memoria interna y usb He hecho un format. He instalado la cm13 y nada. He repetido el proceso con cm14 y nada. Alguna sugerencia? Gracias |
#116
|
||||
|
||||
Hola de nuevo.
Sigo atrapado en el tprw , tengo instalado el último. Se me quedo enganchado al actualizar por OTA la rom del 9. He hecho todos lo wipes menos memoria interna y usb He hecho un format. He instalado la cm13 y nada. He repetido el proceso con cm14 y nada. Alguna sugerencia? Gracias Luego vuelve a poner si quieres el twrp. Instala la 7.0 de cm, las gapps y desde esta update a la 7.1 con las gapps correspondientes. Saludos, Enviado desde mi Aquaris E5 mediante Tapatalk |
#117
|
||||
|
||||
Hola de nuevo.
Sigo atrapado en el tprw , tengo instalado el último. Se me quedo enganchado al actualizar por OTA la rom del 9. He hecho todos lo wipes menos memoria interna y usb He hecho un format. He instalado la cm13 y nada. He repetido el proceso con cm14 y nada. Alguna sugerencia? Gracias |
#118
|
||||
|
||||
Soy un poco paquete en estas cosas. Gracias |
#119
|
||||
|
||||
Alguien ya ha probado la versión de hoy se hay bootloop no me apetece hacer Hard reset otra vez....
|
|
#120
|
||||
|
||||
A mi no me ha dado bootloop.
Saludos Enviado desde mi Aquaris E5 mediante Tapatalk
__________________
Disfrutando del bq Aquaris E5 4G
|