Solution to flash your lost imei!
1) Enable debugging by USB in the settings
2) * # * # 2846579 # * # * -> ProjectMenu -> Background settings -> Usb port settings put the Manufacture mode. (Most likely it is already selected, then select Normal mode and re-manufacture mode)
3) * # * # 2846579 # * # * -> ProjectMenu -> Background settings -> Qualcomm backround open settings put the background open. Password 0
4) Install the DFS
DFS_3.3.0.7.exe (1.99 MB) Number of downloads: 5
, connect your phone to your computer.
5) will be found new hardware (multiple devices). You need to install drivers
DBAdapter_Reserved_Interface.zip (60.41 KB) Number of downloads: 4
on the device vid_12d1 & pid_1035 & mi_04 (Open Device Manager, right-click on the device properties -> Information -> ID equipment). The equipment is established as a COM port.
5) Run the DFS, click Ports, select the port with the signature DBAdapter Reserved Interface (double click) to close.
6) Press the SPC, the bottom will Device Unlocked.
7) In the DM to select Qualcomm.
8) Back the tab Programming, in a field to enter your IMEI IMEI, then click the Read and Write Status.
9) Check Imei, may appear after a reboot, if not try a few more times to try to set the port speed to 115200 (box to the left of DM)
As soon as the IMEI restored change:
* # * # 2846579 # * # * -> ProjectMenu -> Background settings -> Usb port settings to put on the Manufacture mode google mode (or normal if you do not get up google)
* # * # 2846579 # * # * -> ProjectMenu - > Background settings -> Qualcomm backround open settings put close
If someone has 0 IMEI and havent found another way to fix it could try this and tell us if its working!!
Write your IMEI and your IMEI only!!!
