Cita: Originalmente Escrito por
kawazx5
Hola @
ivanbless
Bueno, por ahora no arranca, pero tranquilo, ya tienes el recovery en inglés así que ahora si que vas a poder flasear una ROM.
Asegurate de usar una sd car de al menos 2gb sin nada dentro
Formateala y copia dentro la ROM original dentro de la carpeta DLOAD.
Comprueba que esa carpeta no tiene dentro otra, sólo el archivo de la ROM, si dentro de ella tiene otra carpeta fallara el flaseo/instalacion como parece que te ha ocurrido.
Revisa bien el tutoriale que te enlace en el post anterior y sigue bien los pasos.
Ánimo, que ya casi lo tienes funcionando de nuevo
Amigps despues de tanto intentar, di con un tutorial, en ingles, pero fue el q me ayudo ... Aqui esta el tuto
Download the first official firmware (B107 Stable):
https://mega.co.nz/#!Y0dnmIwY!O6dQGi...cWvKhrTyVEj6iI
2. Extract the UPDATE.app from the archive using WinRAR, WinZip, 7Z or any other archivator.
3. Extract the img files from UPDATE.app using the Huawei Update Extractor from here:
http://forum.xda-developers.com/show....php?t=2433454
3a. Under profile choose "Unknown (worstenbrood)"
3b. In the "Update file" field press the two dots button (on the right from the field), browse to the location of the update and open it. It should show you the list with all the img files contained in the update.
3c. Right mouse button click on the list and press "Extract all". Choose a folder where the img files should be stored (for example C:\ROM Extract). Press OK and it should start unpacking after this. Wait for 2-3 minutes.
4. Download and install the Huawei USB Driver from here:
http://www.mediafire.com/download/p0...USB_Driver.exe
5. Download and install HiSuite from here (might have the USB driver included):
http://download-c.huawei.com/downloa...Code=worldwide
6. Download and install adb + fastboot to "C:\adb" from here:
http://www.mediafire.com/download/by...-setup-1.3.exe
7. Copy the contents of "C:\adb" (adb.exe, AdbWinApi.dll, AdbWinUsbApi.dll, fastboot.exe) to "C:\ROM Extract".
8. With your phone turned off, press the Volume DOWN + POWER for a couple of seconds to enter Fastboot Mode. Now connect it via the USB cable to your computer.
9. Run a command prompt.
In Windows XP go to Start \ Run. Type cmd and press enter. (google for other OS)
10. In the command prompt console type "cd C:\ROM Extract" (without the ") and press ENTER.
***
Here starts the part where you will be manually flashing all the img files.
***
11. You will have to type this command for every img file you have in the "C:\ROM Extract" folder. Command goes like this:
fastboot flash <partition> [ <filename> ]
For example, when you flash the cust image, you type: "fastboot flash cust cust.img" (without the ")
You do this for every image. Usually the first one is EFI.img and the last one is BATT.img (see them in the list provided by the Huawei Update Extractor).
Some of them might not flash, especially SYSTEM.img. Don't worry about that.
Pay attention to what you write. Make sure you don't make any mistakes!
12. After flashing all the images, choose 12a or 12b, depending on whether system.img did flash or not.
12a. IF YOU MANAGED TO SUCCESFULLY FLASH SYSTEM.IMG type in: "fastboot reboot" (without the "). Your phone should restart. Read the text following step 12b. No need to continue with step 13 and so on.
12b. IF SYSTEM.IMG DID NOT FLASH, than type in: "fastboot reboot-bootloader". Your phone should reboot in to fastboot mode. Continue with step 13.
***
After this, some say you should just put the UPDATE.app file (the one you extracted in step 3) in a folder called "dload" (without the ") on your external sd-card, turn off you phone, press Volume UP + Volume DOWN + POWER, and the bootloader should automatically install the official firmware. This didn't work for me, that's why I'm going to continue with my next steps. But, if you've succeeded in flashing system.img, than you shouldn't continue reading this. Just install the official firmware using the dload method.
N.B. By now you should understand that when I'm telling you to type "something", you should type it without the ". That's why I won't continue specifying this.
***
13. Download the Chinese Recovery from here:
http://www.mediafire.com/?zgj5k52sj62fi2o
14. Extract the recovery file from the custom_recovery_6.0.1.9_AscendHonor2.exe file using the Universal Extractor from here:
http://legroom.net/scripts/download....=uniextract161
15. The contents of the folder should be: adb + fastboot (the same as the ones you downloaded before), the executable file called "recovery.bat" and two recovery images: "recovery-off.img" (the official recovery) and "Sec-recovery.img" (the chinese recovery). You will need only the last one.
16. Rename the "Sec-recovery.img" file to "recovery.img" and copy it to "C:\adb".
17. With your phone turned off, press the Volume DOWN + POWER for a couple of seconds to enter Fastboot Mode. Now connect it via the USB cable to your computer.
18. Run a command prompt. In Windows XP got to Start \ Run. Type cmd and press enter. (google for other OS)
19. In the command prompt console type "cd C:\adb" and press ENTER.
20. Than type "fastboot flash recovery recovery.img". After that type "fastboot reboot-bootloader". Your phone should succesfully flash the chinese recovery and restart to fastboot.
21. Safely disconnect your phone from the computer, take out the battery and put it back.
22. For these next steps you will need a microSD card (at least 1GB), an adapter for it, a card reader, another phone that supports microSD cards or anything else that will allow you to transfer data to and from the card.
23. Download the B709 V2.1 by Batty86 ROM from here:
https://mega.co.nz/#!bBVXBQZJ!u-MWTk...J0fcbYc-hEul5I
You can try to use any other custom ROM, but this one worked for me.
24. Place the ROM on the microSD card (DO NOT EXTRACT THE ZIP FILE!) and put it back inside your phone.
25. On your phone press Volume UP + POWER for a couple of seconds. You should enter the Chinese Recovery.
***
Now we are going to flash the custom ROM
Because the menu is in chinese, just do what I tell you to. You navigate by pressing the Volume UP and Volume DOWN buttons on your phone, and select an option by pressing the POWER button.
***
26. First we will wipe all the data.
26a. Data / Factory Reset. Go to option 4 and press POWER. Press POWER once again. A console should appear on your phone screen. Should be done in a couple of seconds.
26b. Cache. Go to option 5 and press POWER. Press POWER once again. Same thing as with 26a: console, 2 seconds, done!
27. Flashing the ROM. Go to option 2 and press POWER. In the new menu go to option 4 and press POWER. Now you should see your ROM listed (eg. hwu9508_B709V2.1_Batty86.zip). Select it and press POWER. Press POWER once again to confirm.
28. Wait for a couple of minutes for it to flash. In my case it finished when the progress bar didn't even fill half of its lenght, so don't worry about that. Everything should be fine.
29. In order to go back, in this menu select option 5 and press POWER. We're in the main menu. Now we need to restart your phone to allow the ROM to finish the installation. Select option 1 and press POWER.
30. Your phone should restart, pass the Huawei Ascend logo, go to the 4 coloured dots, stay there for a couple of minutes and get you to the first-boot/personalization screen.
That's it! Hope this guide will help. I wrote it like a "FOR DUMMIES" guide, so I guess everything should be clear. If not, go ahead and ask your questions.
Good luck!
A mi si me flasheo el system.img asi q no tuve q hacer los demas pasos