Ver Mensaje Individual
  #6  
Viejo 17/10/12, 12:45:05
Array

[xs_avatar]
carlitrox007 carlitrox007 no está en línea
Usuario novato en la web
 
Fecha de registro: oct 2012
Mensajes: 7
Tu operador: Movistar

Mas cosas, ya he intentado el metodo que explicas mas arriba al ejecutar el a501 A.bat me ha dado este resultado con un error por el final:

************************************************** **************
* Before executing, be sure to delete recovery-from-boot.p *
* from /system to ensure recovery will stick *
************************************************** **************

****************************************
* Reboot your tablet into APX mode *
****************************************

Generate your SBK with your CPUID from here :
http://vache-android.com/v1/index.php?site=sbk

Enter your SBK:0x42024C00 0x933D8901 0B776D03 0xAA772103
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x03889248441f9297
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0

sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
Formatting partition 2 BCT please wait.. FAILED!
command failure: create failed (bad data)
bootloader status: partition table is required for this command (code: 8) messag
e: nverror:0x4 (0x4) flags: 0

Presione una tecla para continuar . . .


Despues el siguiete paso "3. run recovery 1.7.3 -> "Mount and Storage" -> "Format /system"(better than twice)." no se como se hace, por cierto si pinchas encima del link del recovery1.7.3 te manda a una pagina de perfumes. Exactamente como se ejecuta este recovery ??
Gracias y perdona por la paliza que te estoy dando.
Responder Con Cita