Hola, buenas, tengo un problema con mi hannspad. No consigo sacarla del Brickeo. Me da un error constante que no deja crear la particion BCT. He probado con varios nvflash diferentes y me sale el mismo error. La tablet arranca siempre en modo APX. Tambien he probado a realizar el destroy total de slatedroid
http://www.slatedroid.com/topic/2580...47#entry276547 , pero me salta un error similar:
setbct failed NvError 0x0
command failure: bootloader download failed
si le paso el nvflash:
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x171440404260f0d7
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: nand
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: hanns.bct
- 4080/4080 bytes sent
hanns.bct sent successfully
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 941356/941356 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 1 0
creating partition: BCT
failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x
b0011 (0xb0011) flags: 0
Please now refer back to the guide section "Finishing the Restoration Procedure.
" included with this backup system/the slatedroid forum thread.
Presione una tecla para continuar . . .
googleando el error failed executing command 16 NvError 0x120002
no encuentro casinada, alguno habla de descargar otra nvflash pero nada..
algún alma caritativa sabe sobre este fallo??
muchas gracias de antemano..