No, yo tambien lo hize lo ultimo poner el recovery cw...
El recovery yo lo flasheo igual que como si fuera un firm o rom, si tu lo roteaste quemandole la rom del link, pues el recovery se hace absolutamente igual, siguiendo estos pasos. Revisa tambien las opciones de depuracion usb de la tablet....
Prueba con volver a instalar los drivers pero en OTRO puerto usb distinto....
Sino siempre tienes la opcion de hacer un reset de fabrica y restaurarla como orginalmente viene, y luego vuelve a empezar todo el proceso.
1. Download
RKBatchTool and the firmware or the
firmware with root access by CTYDEHT2013
2. Turn off the tablet
3. Unzip the firmware and RKBatchTool
4. Start RKBatchTool.exe (in the lower left corner you can choose English (for convenience, but not necessarily))
Click on digging "..." FW Path to the right and select the firmware file (img).
5. Connect the tablet to your PC using usb cable while holding the volume up button "+" and on.
In Windows prompts you to install a driver for the new device. Choosing suitable for your version of Windows and install it. (The drivers are in the folder with RKBatchTool)
If something goes wrong, you can install the driver manually by right-clicking on the desired inf-file and select "Install."
If all is well, the driver is installed correctly, the number "1" in the Connected Devices should turn green.
7. Click Upgrade (second down) and wait for the end of the message.
8. At the end of the tablet will turn on automatically.
suerte.
Cita: Originalmente Escrito por
commendatore_1_18
Gracias, para rootearlo no tuve problema alguno, pero ahora no hace nada, lo máximo que he conseguido es al pulsar las teclas ON -Vol + es acceder al muñeco de android con las tripas abiertas y con el signo de exclamación rojo.
Como almacenamiento USB no hay problema.
¿Tendrá algo que ver el tenerla rooteada?