Ver Mensaje Individual
  #7  
Viejo 17/10/12, 13:38:08
Array

[xs_avatar]
Manolo55 Manolo55 no está en línea
Usuario muy activo
 
Fecha de registro: abr 2012
Mensajes: 2,014
Tu operador: Movistar

 Cita: Originalmente Escrito por carlitrox007 Ver Mensaje
Mas cosas, ya he intentado el metodo que explicas mas arriba al ejecutar el a501 A.bat me ha dado este resultado con un error por el final:

************************************************** **************
* Before executing, be sure to delete recovery-from-boot.p *
* from /system to ensure recovery will stick *
************************************************** **************

****************************************
* Reboot your tablet into APX mode *
****************************************

Generate your SBK with your CPUID from here :
http://vache-android.com/v1/index.php?site=sbk

Enter your SBK:0x42024C00 0x933D8901 0B776D03 0xAA772103
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x03889248441f9297
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0

sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
Formatting partition 2 BCT please wait.. FAILED!
command failure: create failed (bad data)
bootloader status: partition table is required for this command (code: 8) messag
e: nverror:0x4 (0x4) flags: 0

Presione una tecla para continuar . . .


Despues el siguiete paso "3. run recovery 1.7.3 -> "Mount and Storage" -> "Format /system"(better than twice)." no se como se hace, por cierto si pinchas encima del link del recovery1.7.3 te manda a una pagina de perfumes. Exactamente como se ejecuta este recovery ??
Gracias y perdona por la paliza que te estoy dando.
je je, igualito igualito que a mi

Vamos a ver... arancas el recovery? O no.

Ah insiste unas cuantas veces, a mí me costó.
Responder Con Cita