Siguiendo con el trasteo, he visto que en la placa interior tiene un juego de pines Tx0 Rx0 y Tx1 Rx1, y senti curiosidad....asi que le enchufe el serial a 921600 baud
y esto es lo qeu tenemos...tenia la esperanza de interrumpir el boot y poder alterarlo (como se puede hacer en ciertos cacharros tales como routers, nas etc)
Pero no ha sido posible, si que aporta algo de informacion sobre las ubicaciones de memoria
Por si fuera de ayuda, os cuelgo el log de un boot
En TX0-RX0 hay resultados, en TX1-RX1, no hay nada
Código:
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
[USBD] USB PRB0 LineState: 0
[USBD] USB cable/ No Cable inserted!
[PLFM] Keep stay in USB Mode
wait for frequency meter finish, CLK26CALI = 0x81
mt_pll_post_init: mt_get_cpu_freq = 845000Khz
wait for frequency meter finish, CLK26CALI = 0x90
mt_pll_post_init: mt_get_bus_freq = 273000Khz
wait for frequency meter finish, CLK26CALI = 0x81
mt_pll_post_init: mt_get_mem_freq = 266347Khz
[PWRAP] pwrap_init_preloader
[PWRAP] pwrap_init
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=0,rdata=2D52
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=1,rdata=800
[PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=2 rdata=5AA5
[PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=3 rdata=5AA5
[PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=4 rdata=5AA5
[PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=5 rdata=5AA5
[PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=6 rdata=5AA5
[PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=7 rdata=5AA5
[PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=8 rdata=5AA5
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=9,rdata=1001
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=10,rdata=B54B
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=11,rdata=B54B
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=12,rdata=B54B
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=13,rdata=B54B
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=14,rdata=B54B
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=15,rdata=B54B
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=16,rdata=B54B
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=17,rdata=2003
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=18,rdata=6A97
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=19,rdata=6A97
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=20,rdata=6A97
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=21,rdata=6A97
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=22,rdata=6A97
[PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=23,rdata=6A97
[PWRAP] _pwrap_init_reg_clock
[PMIC_WRAP]wrap_init pass,the return value=0.
[pmic_init] Preloader Start..................
[pmic_init] PMIC CHIP Code = 0x2023
INT_MISC_CON: 0 TOP_RST_MISC: 0
pl pmic powerkey Press
[pmic_init] PowerKey = 1
[pmic_init] is USB in = 0xB004
[pmic_init] Reg[0x11A]=0x1B
[I2C-PL] addr 6B read byte = 0x93
mt6333_read_byte: i2c_read: ret_code: 0
[mt6333_init] Reg[0]=0x93
[I2C-PL] addr 6B read byte = 0x30
mt6333_read_byte: i2c_read: ret_code: 0
[mt6333_init] Reg[FD]=0x30
[I2C-PL] addr 6B read byte = 0x10
mt6333_read_byte: i2c_read: ret_code: 0
[mt6333_init] Reg[2C]=0x10
[I2C-PL] addr 6B read byte = 0x0
mt6333_read_byte: i2c_read: ret_code: 0
[I2C-PL] i2c_write
mt6333_write_byte: i2c_write: ret_code: 0
[I2C-PL] addr 6B read byte = 0x8
mt6333_read_byte: i2c_read: ret_code: 0
[I2C-PL] i2c_write
mt6333_write_byte: i2c_write: ret_code: 0
[I2C-PL] addr 6B read byte = 0x0
mt6333_read_byte: i2c_read: ret_code: 0
[I2C-PL] i2c_write
mt6333_write_byte: i2c_write: ret_code: 0
[I2C-PL] addr 6B read byte = 0x0
mt6333_read_byte: i2c_read: ret_code: 0
[I2C-PL] i2c_write
mt6333_write_byte: i2c_write: ret_code: 0
[pmic_init] Done...................
chr force en
[PLFM] Init I2C: OK(0)
[PLFM] Init PWRAP: OK(0)
[PLFM] Init PMIC: OK(0)
[PLFM] chip[CA00]
[BLDR] Build Time: 20141113-125840
▒▒▒▒▒▒▒▒▒▒▒==== Dump RGU Reg ========
RGU MODE: 4D
RGU LENGTH: FFE0
RGU STA: 0
RGU INTERVAL: FFF
RGU SWSYSRST: 0
RGU MTK_WDT_NONRST_REG2: 0
RGU MTK_WDT_NONRST_REG: 0
==== Dump RGU Reg End ====
RGU: g_rgu_satus:0
wdt disable rgu eco.....
mtk_wdt_mode_config mode value=0, tmp:22000000
PL P ON
WDT does not trigger reboot
wdt enable rgu eco(22000001)
mtk_wdt_mode_config mode value=4C, tmp:2200004C
RGU mtk_wdt_init:MTK_WDT_DEBUG_CTL(590200F3)
kpd read addr: 0x0040: data:0x4005
Enter mtk_kpd_gpio_set!
after set KP enable: KP_SEL = 0x0 !
MTK_PMIC_RST_KEY is used for this project!
[RTC] get_frequency_meter: input=0x0, ouput=5
[RTC] get_frequency_meter: input=0x0, ouput=3967
[RTC] get_frequency_meter: input=0x0, ouput=5
[RTC] get_frequency_meter: input=0x0, ouput=0
[RTC] get_frequency_meter: input=0x0, ouput=0
[RTC] bbpu = 0x6, con = 0x8FFA
rtc_first_boot_init
[RTC] get_frequency_meter: input=0x0, ouput=5
[RTC] get_frequency_meter: input=0x0, ouput=3967
[RTC] get_frequency_meter: input=0x0, ouput=5
[RTC] get_frequency_meter: input=0x0, ouput=0
[RTC] get_frequency_meter: input=0x0, ouput=0
rtc_2sec_stat_clear
rtc_2sec_reboot_check cali=1792
rtc_2sec_stat_clear
[RTC] irqsta = 0x0, pdn1 = 0x0, pdn2 = 0x201, spar0 = 0xC0, spar1 = 0x800
[RTC] new_spare0 = 0x0, new_spare1 = 0x1, new_spare2 = 0x1, new_spare3 = 0x1
[RTC] bbpu = 0x6, con = 0x426, cali = 0x700
pl pmic powerkey Release
[PLFM] mtk_detect_pmic_just_rst ++
detecting pmic just reset
[PLFM] mtk_detect_pmic_just_rst --
[PLFM] 2sec reboot!
[RTC] rtc_bbpu_power_on done
[SD0] Bus Width: 1
[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(193) DS(0) RS(0)
[SD0] Switch to High-Speed mode!
[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(2) DDR(1) DIV(96) DS(0) RS(0)
[SD0] Bus Width: 8
[SD0] Size: 15032 MB, Max.Speed: 52000 kHz, blklen(512), nblks(30785536), ro(0)
[SD0] Initialized
[SD0] SET_CLK(52000kHz): SCLK(50000kHz) MODE(2) DDR(1) DIV(0) DS(0) RS(0)
[I2C-PL] addr 6B read byte = 0x30
mt6333_read_byte: i2c_read: ret_code: 0
[I2C-PL] i2c_write
mt6333_write_byte: i2c_write: ret_code: 0
[I2C-PL] addr 6B read byte = 0x30
mt6333_read_byte: i2c_read: ret_code: 0
[I2C-PL] i2c_write
mt6333_write_byte: i2c_write: ret_code: 0
[I2C-PL] addr 6B read byte = 0x50
mt6333_read_byte: i2c_read: ret_code: 0
[I2C-PL] i2c_write
mt6333_write_byte: i2c_write: ret_code: 0
[I2C-PL] addr 6B read byte = 0x50
mt6333_read_byte: i2c_read: ret_code: 0
[I2C-PL] i2c_write
mt6333_write_byte: i2c_write: ret_code: 0
rank 0 coarse = 19
rank 0 fine = 72
10:| 0 0 0 0 0 1 1 1 0
opt_dle value:8
rank 1 coarse = 19
rank 1 fine = 80
10:| 0 0 0 0 0 1 1 1 0
opt_dle value:8
byte:0, (DQS,DQ)=(A,8)
byte:1, (DQS,DQ)=(9,8)
byte:2, (DQS,DQ)=(B,8)
byte:3, (DQS,DQ)=(9,8)
[MEM] complex R/W mem test pass
[Dram_Buffer] dram size:-2147483648
[Dram_Buffer] structure size: 1777016
[Dram_Buffer] structure size2: 512
[PLFM] Init Boot Device: OK(0)
============func=load_pt===scan pmt from 00000003AB700000=====
find pt at 00000003AB700000
find pt
part PRELOADER size 0000000000000000 0000000000040000
part MBR size 0000000000000000 0000000000080000
part EBR1 size 0000000000080000 0000000000080000
part PRO_INFO size 0000000000100000 0000000000300000
part NVRAM size 0000000000400000 0000000000500000
part PROTECT_F size 0000000000900000 0000000000A00000
part PROTECT_S size 0000000001300000 0000000000A00000
part SECCFG size 0000000001D00000 0000000000040000
part UBOOT size 0000000001D40000 0000000000060000
part BOOTIMG size 0000000001DA0000 0000000001400000
part RECOVERY size 00000000031A0000 0000000001400000
part SEC_RO size 00000000045A0000 0000000000600000
part MISC size 0000000004BA0000 0000000000080000
part LOGO size 0000000004C20000 0000000000800000
part EXPDB size 0000000005420000 0000000000BE0000
part ANDROID size 0000000006000000 000000004C800000
part CACHE size 0000000052800000 0000000040000000
part USRDATA size 0000000092800000 0000000317B00000
part BMTPOOL size 00000000FFFF00A8 0000000001500000
[PART] blksz: 512B
[PART] [0x0000000000000000-0x000000000003FFFF] "PRELOADER" (512 blocks)
[PART] [0x0000000000000000-0x000000000007FFFF] "MBR" (1024 blocks)
[PART] [0x0000000000080000-0x00000000000FFFFF] "EBR1" (1024 blocks)
[PART] [0x0000000000100000-0x00000000003FFFFF] "PRO_INFO" (6144 blocks)
[PART] [0x0000000000400000-0x00000000008FFFFF] "NVRAM" (10240 blocks)
[PART] [0x0000000000900000-0x00000000012FFFFF] "PROTECT_F" (20480 blocks)
[PART] [0x0000000001300000-0x0000000001CFFFFF] "PROTECT_S" (20480 blocks)
[PART] [0x0000000001D00000-0x0000000001D3FFFF] "SECURE" (512 blocks)
[PART] [0x0000000001D40000-0x0000000001D9FFFF] "UBOOT" (768 blocks)
[PART] [0x0000000001DA0000-0x000000000319FFFF] "BOOTIMG" (40960 blocks)
[PART] [0x00000000031A0000-0x000000000459FFFF] "RECOVERY" (40960 blocks)
[PART] [0x00000000045A0000-0x0000000004B9FFFF] "SECSTATIC" (12288 blocks)
[PART] [0x0000000004BA0000-0x0000000004C1FFFF] "MISC" (1024 blocks)
[PART] [0x0000000004C20000-0x000000000541FFFF] "LOGO" (16384 blocks)
[PART] [0x0000000005420000-0x0000000005FFFFFF] "EXPDB" (24320 blocks)
[PART] [0x0000000006000000-0x00000000527FFFFF] "ANDSYSIMG" (2506752 blocks)
[PART] [0x0000000052800000-0x00000000927FFFFF] "CACHE" (2097152 blocks)
[PART] [0x0000000092800000-0x00000000DC3FFFFF] "USER" (2416640 blocks)
[ROM_INFO] 'v2','0x1D00000','0x40000','0x45A0000','0x2C00'
[SEC_K] SML KEY AC = 0
[SEC_K] SBC_PUBK Not Found '0x6000'
[SEC] AES Legacy : 0
[SEC] SECCFG AC : 1
[SEC] read '0x1D00000'
0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
[LIB] SecLib.a '20131222-133749'
[LIB] CFG read size '0x2000' '0x1860'
[LIB] Name =
[LIB] Config = 0x22, 0x22
0x31,0x41,0x35,0x35
[LIB] seccfg magic is incorrect
[platform_vusb_on] PASS
[TOOL] PMIC not dectect usb cable!
[TOOL] <UART> listen ended, receive size:0!
[TOOL] <UART> wait sync time 150ms->5ms
[TOOL] <UART> receieved data: ()
[SECRO] Don't read
[AUTHEN] rsa.N length = 1024 bytes
[AUTHEN] rsa.E length = 20 bytes
[LIB] NS-CHIP
[SBC] Don't check
Device APC domain init setup:
[PART] Image with part header
[PART] name : LK
[PART] addr : FFFFFFFFh
[PART] size : 237000
[PART] magic: 58881688h
[PART] load "UBOOT" from 0x0000000001D40200 (dev) to 0x81E00000 (mem) [SUCCESS]
[PART] load speed: 10519KB/s, 237000 bytes, 22ms
chr force dis
[PLFM] boot reason: 6
[PLFM] boot mode: 0
[PLFM] META COM0: 0
[PLFM] <0xFFB97910>: 0x1
[PLFM] boot time: 1685ms
[PLFM] DDR reserve mode: enable = 0, success = 0
[BLDR] jump to 0x81E00000
[BLDR] <0x81E00000>=0
[dsi_drv.c] PLL config:data_rate=880,txdiv=1,pcw=1135688467 ,delta1=5,pdelta1=0x800
after efuse adjust, DSI_CLK_REG = 0x821, DSI_DAT0_REG=0x401,DSI_DAT1_REG=0x101,D SI_DAT2_REG=0x101,DSI_DAT3_REG=0x101
[DISP] - DSI_PowerOn. 0x 0
DISP/[DISP] - kernel - _DSI_PHY_TIMCONFIG, Cycle Time = 10(ns), Unit Interval = 2(ns). , lane# = 4
DISP/[DISP] - kernel - DSI_PHY_TIMCONFIG, HS_TRAIL = 20, HS_ZERO = 15, HS_PRPR = 7, LPX = 8, TA_GET = 40, TA_SURE = 12, TA_GO = 32, CLK_TRAIL = 20, CLK_ZERO = 4 0, CLK_HS_PRPR = 6
DSI_PHY_TIMCONFIG, 0x140f0708,0x1f280c20,0x14280000,0x00101f06
DISP/[dsi_drv.c] LK config VDO Timing: 1184
DISP/[DISP] kernel - video timing, mode = 3
DISP/[DISP] kernel - VSA : 2 0(us)
DISP/[DISP] kernel - VBP : 18 0(us)
DISP/[DISP] kernel - VFP : 15 0(us)
DISP/[DISP] kernel - VACT: 1200
lcm is not connected
[DISP] - DSI_PowerOff. 0x 3
[mtkfb] LCM TYPE: DSI
[mtkfb] LCM INTERFACE: NONE
[mtkfb] LCM resolution: 1920 x 1200
[LEDS]LK: leds_init: mt65xx_backlight_off
[LEDS]LK: mt65xx_backlight_off
[LEDS]LK: lcd-backlight level is 0
[LEDS]LK: isink_init: turn on PMIC6320 isink
[0] [LK_PMIC_INIT_SETTING_V1] PMIC Chip = 0x2023
[I2C-LK] addr 6b read byte = 0x93
[0] [mt6333_init] Reg[0]=0x93
[I2C-LK] addr 6b read byte = 0x30
[0] [mt6333_init] Reg[fd]=0x30
[I2C-LK] addr 75 read byte = 0xa
[I2C-LK] addr 75 read byte = 0x2
[0] [tps6128x_dump_register][0x0]=0x2 [I2C-LK] addr 75 read byte = 0x1
[0] [tps6128x_dump_register][0x1]=0x1 [I2C-LK] addr 75 read byte = 0x6
[0] [tps6128x_dump_register][0x2]=0x6 [I2C-LK] addr 75 read byte = 0xa
[0] [tps6128x_dump_register][0x3]=0xa [I2C-LK] addr 75 read byte = 0x1b
[0] [tps6128x_dump_register][0x4]=0x1b [I2C-LK] addr 75 read byte = 0x20
[0] [tps6128x_dump_register][0x5]=0x20 [I2C-LK] addr 75 read byte = 0xa
[I2C-LK] i2c_write
[I2C-LK] addr 75 read byte = 0x1b
[I2C-LK] i2c_write
[I2C-LK] addr 75 read byte = 0x2
[0] [tps6128x_dump_register][0x0]=0x2 [I2C-LK] addr 75 read byte = 0x1
[0] [tps6128x_dump_register][0x1]=0x1 [I2C-LK] addr 75 read byte = 0x6
[0] [tps6128x_dump_register][0x2]=0x6 [I2C-LK] addr 75 read byte = 0xa
[0] [tps6128x_dump_register][0x3]=0xa [I2C-LK] addr 75 read byte = 0x1f
[0] [tps6128x_dump_register][0x4]=0x1f [I2C-LK] addr 75 read byte = 0x20
[0] [tps6128x_dump_register][0x5]=0x20 [10] platform_init()
[mt_part_register_device]
[mt_part_register_device]malloc 1024 : 81e592b8
mt6577_part_init_pmt
============func=load_pt===scan pmt from 3ab700000=====
find pt at 3ab700000
Find pt
partition PRELOADER size 0000000000000000 0000000000040000
partition MBR size 0000000000000000 0000000000080000
partition EBR1 size 0000000000080000 0000000000080000
partition PRO_INFO size 0000000000100000 0000000000300000
partition NVRAM size 0000000000400000 0000000000500000
partition PROTECT_F size 0000000000900000 0000000000a00000
partition PROTECT_S size 0000000001300000 0000000000a00000
partition SECCFG size 0000000001d00000 0000000000040000
partition UBOOT size 0000000001d40000 0000000000060000
partition BOOTIMG size 0000000001da0000 0000000001400000
partition RECOVERY size 00000000031a0000 0000000001400000
partition SEC_RO size 00000000045a0000 0000000000600000
partition MISC size 0000000004ba0000 0000000000080000
partition LOGO size 0000000004c20000 0000000000800000
partition EXPDB size 0000000005420000 0000000000be0000
partition ANDROID size 0000000006000000 000000004c800000
partition CACHE size 0000000052800000 0000000040000000
partition USRDATA size 0000000092800000 0000000318700000
[mt_part_get_partition] MISC
[mt_part_get_partition] 25d00
[LK_ENV]ENV initialize sucess
[LK_ENV]env:
data_free_size_th=52428800
DISP/disp common log enabled
DISP/lcd log enabled
[LK_ENV]get_env DFO
LCM Resolution will be changed, original: 1920x1200, now: 0x0
Invalid resolution: 0x0
DISP_Init, 475
[DSS]disp_path_ddp_clock_on
DISP/DISP_Init, 483
DISP/DISP_Init, 488
DISP/DISP_Init, 494
DISP/DISP_Init, 498
DSI_PHY_clk_adjusting: efuse register 0x10206180=0x0, bit28_31=0x0, bit24_27=0x0 , bit20_23=0x0,bit16_19=0x0,bit12_15=0x0
before efuse adjust, DSI_CLK_REG = 0x821, DSI_DAT0_REG=0x401,DSI_DAT1_REG=0x101, DSI_DAT2_REG=0x101,DSI_DAT3_REG=0x101
[dsi_drv.c] PLL config:data_rate=880,txdiv=1,pcw=1135688467,delta1=5,pdelta1=0x8 00
after efuse adjust, DSI_CLK_REG = 0x821, DSI_DAT0_REG=0x401,DSI_DAT1_REG=0x101,D SI_DAT2_REG=0x101,DSI_DAT3_REG=0x101
[DISP] - DSI_PowerOn. 0x 0
DISP/[DISP] - kernel - _DSI_PHY_TIMCONFIG, Cycle Time = 10(ns), Unit Interval = 2(ns). , lane# = 4
DISP/[DISP] - kernel - DSI_PHY_TIMCONFIG, HS_TRAIL = 20, HS_ZERO = 15, HS_PRPR = 7, LPX = 8, TA_GET = 40, TA_SURE = 12, TA_GO = 32, CLK_TRAIL = 20, CLK_ZERO = 4 0, CLK_HS_PRPR = 6
DSI_PHY_TIMCONFIG, 0x140f0708,0x1f280c20,0x14280000,0x00101f06
DISP/[dsi_drv.c] LK config VDO Timing: 1184
DISP/[DISP] kernel - video timing, mode = 3
DISP/[DISP] kernel - VSA : 2 0(us)
DISP/[DISP] kernel - VBP : 18 0(us)
DISP/[DISP] kernel - VFP : 15 0(us)
DISP/[DISP] kernel - VACT: 1200
[DDP] disp_bls_init : srcWidth = 1920, srcHeight = 1200
[DDP] disp_bls_init : CG = 0x0, BLS_EN = 0x0, PWM_DUTY = 1023
[DSS]dispsys_bypass_color, width=1920, height=1200
[DSS]dispsys_bypass_color, 0x2000203c, 0x1, 0x780, 0x4b0
RDMA: w=1920, h=1200, pitch=5760, mode=0
DISP/DISP_Init, 503
DISP/DISP_Init, 506
[mt_part_get_partition] LOGO
[mt_part_get_partition] 26100
[mt_part_get_partition] LOGO
[mt_part_get_partition] 26100
[800]
=========================================
[800] [LK_BOOT] LOGO magic number : 0x58881688
[800] [LK_BOOT] LOGO name : LOGO
[800] [LK_BOOT] LOGO size : 862395
[800] =========================================
[800] read the data of LOGO
is_low_battery, FALSE
[wwy] hardware address = fda2f000, fb_offset_logo = 3
DISP/[Func]LCD_ConfigOVL
[wwy] enter DSI_RegUpdate
[wwy] DSI_RegUpdate dsi_wait_time = 0
[wwy] DSI_RegUpdate dsi_wait_time = 1
[wwy] DSI_RegUpdate dsi_wait_time = 2
[wwy] DSI_RegUpdate dsi_wait_time = 3
[wwy] DSI_RegUpdate dsi_wait_time = 4
[wwy] DSI_RegUpdate dsi_wait_time = 5
[wwy] DSI_RegUpdate dsi_wait_time = 6
[wwy] DSI_RegUpdate dsi_wait_time = 7
[wwy] DSI_RegUpdate dsi_wait_time = 8
[wwy] DSI_RegUpdate dsi_wait_time = 9
[wwy] DSI_RegUpdate dsi_wait_time = 10
[wwy] DSI_RegUpdate dsi_wait_time = 11
[wwy] DSI_RegUpdate dsi_wait_time = 12
[wwy] DSI_RegUpdate dsi_wait_time = 13
[wwy] DSI_RegUpdate dsi_wait_time = 14
[wwy] DSI_RegUpdate dsi_wait_time = 15
[wwy] DSI_RegUpdate dsi_wait_time = 16
[wwy] DSI_RegUpdate dsi_wait_time = 17
[wwy] DSI_RegUpdate dsi_wait_time = 18
[wwy] DSI_RegUpdate dsi_wait_time = 19
[wwy] DSI_RegUpdate dsi_wait_time = 20
[wwy] DSI_RegUpdate dsi_wait_time = 21
[wwy] DSI_RegUpdate dsi_wait_time = 22
[wwy] DSI_RegUpdate dsi_wait_time = 23
[wwy] DSI_RegUpdate dsi_wait_time = 24
[wwy] DSI_RegUpdate dsi_wait_time = 25
[wwy] DSI_RegUpdate dsi_wait_time = 26
[wwy] DSI_RegUpdate dsi_wait_time = 27
[wwy] DSI_RegUpdate dsi_wait_time = 28
[wwy] DSI_RegUpdate dsi_wait_time = 29
[wwy] DSI_RegUpdate dsi_wait_time = 30
[wwy] DSI_RegUpdate dsi_wait_time = 31
[wwy] DSI_RegUpdate dsi_wait_time = 32
[wwy] DSI_RegUpdate dsi_wait_time = 33
[wwy] DSI_RegUpdate dsi_wait_time = 34
[wwy] DSI_RegUpdate dsi_wait_time = 35
[wwy] DSI_RegUpdate dsi_wait_time = 36
[wwy] DSI_RegUpdate dsi_wait_time = 37
[wwy] DSI_RegUpdate dsi_wait_time = 38
[wwy] end DSI_RegUpdate
DISP/[Func]LCD_ConfigOVL
kpd read addr: 0x0502: data:0x4004
is_low_battery, FALSE
[LEDS]LK: mt65xx_backlight_on
[LEDS]LK: lcd-backlight level is 255
[LEDS][256] LK: backlight_set_pwm:duty is 255/255
[LEDS][256] LK: backlight_set_pwm:clk_src/div is 03
[LEDS][256] LK: backlight_set_pwm: old mode: thres/data_width is 255/255
detecting pmic just reset
[1240] [mboot_recovery_load_misc]: size is 6144
[1240] [mboot_recovery_load_misc]: misc_addr is 0x81e5d6d0
[mt_part_get_partition] MISC
[mt_part_get_partition] 25d00
[1260] [LK_BOOT] Load 'MISC' partition to 0x81E5D6D0 (6144 bytes in 2 ms)
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
mtk detect key function key = 1
mtk detect key function key = 0
mtk detect key function pmic_detect_homekey MT65XX_PMIC_RST_KEY = 0
WDT get boot reason is 6 from pre-loader
[mt_part_get_partition] PRELOADER
[mt_part_get_partition] 0
[partition_get_index]find seccfg SECURE index 7
[mt_part_get_partition] SECURE
[mt_part_get_partition] e800
[partition_get_index]find sec_ro SECSTATIC index 11
[mt_part_get_partition] SECSTATIC
[mt_part_get_partition] 22d00
[SBC] NS-CHIP
[SBC] Don't check
the bat_vol is 3687,the bat_tempture is 536,the bat_temp is 25
[mt65xx_bat_init] check VBAT=3719 mV with 3450 mV
mt65xx_bat_init] samwwwwwwwwwwwwwwwwwwwwwwwwwww
[I2C-LK] addr 6b read byte = 0x37
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x37
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x1b
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x1b
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x1b
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x11
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x21
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x73
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0xb2
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0xd6
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0xd6
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x9c
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x9c
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x9c
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x9c
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x4b
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x47
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x60
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x42
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x1b
[I2C-LK] i2c_write
[I2C-LK] addr 6b read byte = 0x42
[I2C-LK] addr 6b read byte = 0x1b
[I2C-LK] addr 6b read byte = 0x0
[I2C-LK] addr 6b read byte = 0x21
[I2C-LK] addr 6b read byte = 0xd6
[I2C-LK] addr 6b read byte = 0x9c
[I2C-LK] addr 6b read byte = 0x7b
[I2C-LK] addr 6b read byte = 0x48
[I2C-LK] addr 6b read byte = 0x0
[I2C-LK] addr 6b read byte = 0x80
[I2C-LK] addr 6b read byte = 0x20
is_low_battery, FALSE
show_logo, in_addr=0xfc9000a4, fb_addr=0xfcd00000, logolen=16673, ticks=3126
ticks=0
[wwy] hardware address = fcd00000, fb_offset_logo = 0
DISP/[Func]LCD_ConfigOVL
[wwy] enter DSI_RegUpdate
[wwy] DSI_RegUpdate dsi_wait_time = 0
[wwy] DSI_RegUpdate dsi_wait_time = 1
[wwy] DSI_RegUpdate dsi_wait_time = 2
[wwy] DSI_RegUpdate dsi_wait_time = 3
[wwy] DSI_RegUpdate dsi_wait_time = 4
[wwy] DSI_RegUpdate dsi_wait_time = 5
[wwy] DSI_RegUpdate dsi_wait_time = 6
[wwy] DSI_RegUpdate dsi_wait_time = 7
[wwy] DSI_RegUpdate dsi_wait_time = 8
[wwy] DSI_RegUpdate dsi_wait_time = 9
[wwy] DSI_RegUpdate dsi_wait_time = 10
[wwy] DSI_RegUpdate dsi_wait_time = 11
[wwy] DSI_RegUpdate dsi_wait_time = 12
[wwy] DSI_RegUpdate dsi_wait_time = 13
[wwy] DSI_RegUpdate dsi_wait_time = 14
[wwy] DSI_RegUpdate dsi_wait_time = 15
[wwy] DSI_RegUpdate dsi_wait_time = 16
[wwy] DSI_RegUpdate dsi_wait_time = 17
[wwy] DSI_RegUpdate dsi_wait_time = 18
[wwy] DSI_RegUpdate dsi_wait_time = 19
[wwy] DSI_RegUpdate dsi_wait_time = 20
[wwy] DSI_RegUpdate dsi_wait_time = 21
[wwy] DSI_RegUpdate dsi_wait_time = 22
[wwy] DSI_RegUpdate dsi_wait_time = 23
[wwy] DSI_RegUpdate dsi_wait_time = 24
[wwy] DSI_RegUpdate dsi_wait_time = 25
[wwy] DSI_RegUpdate dsi_wait_time = 26
[wwy] DSI_RegUpdate dsi_wait_time = 27
[wwy] DSI_RegUpdate dsi_wait_time = 28
[wwy] DSI_RegUpdate dsi_wait_time = 29
[wwy] DSI_RegUpdate dsi_wait_time = 30
[wwy] end DSI_RegUpdate
[mt_part_get_partition] PRO_INFO
[mt_part_get_partition] 800
[2760] [LK_BOOT] Load 'PRO_INFO' partition to 0x81E5921C (19 bytes in 11 ms)
[mt_part_get_partition] PRELOADER
[mt_part_get_partition] 0
[partition_get_index]find seccfg SECURE index 7
[mt_part_get_partition] SECURE
[mt_part_get_partition] e800
[partition_get_index]find sec_ro SECSTATIC index 11
[mt_part_get_partition] SECSTATIC
[mt_part_get_partition] 22d00
[SBC] NS-CHIP
[SBC] Don't check
[SBC] NS-CHIP
[SBC] Don't check
[mt_part_get_partition] BOOTIMG
[mt_part_get_partition] ed00
[mt_part_get_partition] BOOTIMG
[mt_part_get_partition] ed00
[2800] part page addr is 0x1da0000
[2820]
============================================================
[2820] [LK_BOOT] Android Partition Name : BOOTIMG
[2820] [LK_BOOT] Android Boot IMG Hdr - Magic : ANDROID
[2820] [LK_BOOT] Android Boot IMG Hdr - Kernel Size : 0x4c2870
[2820] [LK_BOOT] Android Boot IMG Hdr - Rootfs Size : 0xcb62d
[2820] [LK_BOOT] Android Boot IMG Hdr - Page Size : 0x800
[2820] ============================================================
[2820] > page count of kernel image = 2438
[2820] > kernel mem offset = 0x80008000
[2840] > rootfs mem offset = 0x804cb000
[2840] > boot image size = 0x58f800
[mt_part_get_partition] BOOTIMG
[mt_part_get_partition] ed00
[2840]
read the data of BOOTIMG (size = 0x58f800)
[2840] > from - 0x0000000001da0800 (skip boot img hdr)
[2840] > to - 0x80007e00 (starts with kernel img hdr)
[3340]
=========================================
[3340] [LK_BOOT] KERNEL magic number : 0x58881688
[3340] [LK_BOOT] KERNEL name : KERNEL
[3340] [LK_BOOT] KERNEL size : 0x4c2670
[3360] =========================================
[3360]
=========================================
[3360] [LK_BOOT] ROOTFS magic number : 0x58881688
[3360] [LK_BOOT] ROOTFS name : ROOTFS
[3360] [LK_BOOT] ROOTFS size : 0xcb42d
[3360] =========================================
[PROFILE] ------- load boot.img takes 285 ms --------
DISP/[Func]LCD_ConfigOVL
Screen Update Costs 17991 us
[wwy] mt_disp_adjusting_hardware_addr fb_offset_logo = 3
[LK_ENV]get_env DFO
[3420] SSSS size:31
[PROFILE] ------- boot_time takes 1825 ms --------
[LK_ENV]get_env hibboot
[LK_ENV]get_env resume
resume = NULL
booting linux @ 0x80008000, ramdisk @ 0x84000000 (832557)
[LEDS]LK: leds_deinit: LEDS off
[LEDS]LK: red level is 0
[LEDS]LK: PMIC Type: 7, Level: 0
[LEDS]LK: green level is 0
[LEDS]LK: PMIC Type: 6, Level: 0
[LEDS]LK: blue level is 0
[LEDS]LK: PMIC Type: 8, Level: 0
DRAM Rank :2
DRAM Rank[0] Size = 0x40000000
DRAM Rank[1] Size = 0x40000000
cmdline: console=tty0 console=ttyMT0,921600n1 root=/dev/ram lcm=0-nt71397_fhd_ds i_vdo_truly fps=5558 bootprof.pl_t=1685 bootprof.lk_t=1825 printk.disable_uart=1 boot_reason=6 androidboot.serialno=VCXXXXX
lk boot time = 1825 ms
lk boot mode = 0
lk finished --> jump to linux kernel
Uncompressing Linux... done, booting the kernel.
Última edición por renegados Día 16/04/22 a las 14:11:54.
|