Yo he probado otra vez, la carpeta que he quitado me la creado otra vez, pero me he dado cuenta que me pone lo mismo que al compañero del post 4. Tengo permisos denegados en casi todos los sitios
Código:
J:\Descargas 4770K\LG\LG G3\ROOTEAR\LG Root Script v1.2>adb devices
List of devices attached
J:\Descargas 4770K\LG\LG G3\ROOTEAR\LG Root Script v1.2>adb devices
List of devices attached
LGD855c50940c2 device
J:\Descargas 4770K\LG\LG G3\ROOTEAR\LG Root Script v1.2>adb shell
shell@g3:/ $ su
su
1|shell@g3:/ $ sh /sdcard/imageprep/imageprep1.4.sh
sh /sdcard/imageprep/imageprep1.4.sh
------------------------------------------------------------
imageprep - Automated Image File Dumper/Creator for LG G3
version 1.4
by topet2k12001 @XDA
------------------------------------------------------------
------------------------------------------------------------
Preparing...
------------------------------------------------------------
------------------------------------------------------------
REQUIREMENTS:
------------------------------------------------------------
1. NEWLY-FLASHED LG G3 running Android Lollipop (either
via KDZ/TOT or via OTA Update)
2. Device must be rooted beforehand
3. Android Terminal Emulator (get it from Play Store)
4. Busybox app installed, and you must open Busybox to
install it too
5. Extracted Kitkat Boot Stack (image files): aboot.img,
laf.img, dbi.img, rpm.img, tz.img, sbl1.img, and
persist.img
6. Prepend the said files with 'kitkat-' (for example:
kitkat-laf.img, kitkat-aboot.img, and so on), AND
CHANGE THE FILE TYPE FROM '.BIN' TO '.IMG'
7. Bump'd TWRP custom recovery (rename it to twrp.img)
8. Root Checker - helps to ensure that you have Root and
Busybox properly set up
IMPORTANT: Place Kitkat Boot Stack image files to your
Internal Storage->imageprep->kkimagefiles, and your custom
recovery to your Internal Storage->imageprep->twrp (rename
it to twrp.img) before running this script!
Have you read all requirements and accomplished them (type yes or no)? > yes
yes
You entered: yes
I don't believe you.
I will check again...
Checking if Kitkat image files are present...
kitkat-aboot.img exists. Good.
kitkat-dbi.img exists. Good.
kitkat-laf.img exists. Good.
kitkat-persist.img exists. Good.
kitkat-rpm.img exists. Good.
kitkat-sbl1.img exists. Good.
kitkat-tz.img exists. Good.
Custom Recovery (TWRP) twrp.img exists. Good.
Continuing the script...
------------------------------------------------------------
BACKING UP YOUR LOLLIPOP ESSENTIAL PARTITIONS...
------------------------------------------------------------
Backing up Lollipop BOOT, ABOOT, LAF, and RECOVERY
partitions and creating lollipop-boot.img,
lollipop-aboot.img, lollipop-laf.img, and
lollipop-recovery.img...
dd: /dev/block/platform/msm_sdcc.1/by-name/boot: Permission denied
dd: /dev/block/platform/msm_sdcc.1/by-name/aboot: Permission denied
dd: /dev/block/platform/msm_sdcc.1/by-name/laf: Permission denied
dd: /dev/block/platform/msm_sdcc.1/by-name/recovery: Permission denied
------------------------------------------------------------
Wiping RECOVERY partition and replacing with custom
recovery (TWRP)...just to be sure!
------------------------------------------------------------
dd: /dev/block/platform/msm_sdcc.1/by-name/recovery: Permission denied
dd: /dev/block/platform/msm_sdcc.1/by-name/recovery: Permission denied
------------------------------------------------------------
Wiping Lollipop ABOOT and LAF partitions, and replacing
with Kitkat versions...
------------------------------------------------------------
dd: /dev/block/platform/msm_sdcc.1/by-name/aboot: Permission denied
dd: /dev/block/platform/msm_sdcc.1/by-name/aboot: Permission denied
dd: /dev/block/platform/msm_sdcc.1/by-name/laf: Permission denied
dd: /dev/block/platform/msm_sdcc.1/by-name/laf: Permission denied
------------------------------------------------------------
BACKING UP YOUR LOLLIPOP BOOT STACK...
------------------------------------------------------------
Backing up Lollipop SBL1 partition and creating
lollipop-sbl1.img...
dd: /dev/block/platform/msm_sdcc.1/by-name/sbl1: Permission denied
Backing up Lollipop RPM partition and creating
lollipop-rpm.img...
dd: /dev/block/platform/msm_sdcc.1/by-name/rpm: Permission denied
Backing up Lollipop PERSIST partition and creating
lollipop-persist.img...
dd: /dev/block/platform/msm_sdcc.1/by-name/persist: Permission denied
Backing up Lollipop TZ partition and creating
lollipop-tz.img...
dd: /dev/block/platform/msm_sdcc.1/by-name/tz: Permission denied
Backing up Lollipop DBI partition and creating
lollipop-dbi.img...
dd: /dev/block/platform/msm_sdcc.1/by-name/dbi: Permission denied
------------------------------------------------------------
ADJUST DISPLAY SHARPNESS
------------------------------------------------------------
Let's configure the sharpness of your display.
Some people are bothered with the sharpness of the LG G3's
display, while others are comfortable with it.
How sharp do you want the display to be (0 = oversharpening disabled, 40 = devic
e default)? > 0
0
You entered: 0
Applying your preferred display sharpness...
sed: /data/local/tmp/lollipop-boot.img: No such file or directory
------------------------------------------------------------
LIVE BUMP
------------------------------------------------------------
Extracting lollipop-boot.img...
mkdir failed for /data/local/tmp/out, File exists
Segmentation fault
1|shell@g3:/ $
Yo me rindo ya, que al final me va a salir lo del led rojo como el otro día y voy a tener que instalar todo.
Saludos
